yeboabe Posted August 12, 2011 Share Anybody know of any custom frame builders in SA, steel, alu or Carbon - mtb and road!?!? Or local courses one can do to learn!?!? Link to comment Share on other sites More sharing options...
Tumbleweed Posted August 12, 2011 Share Anybody know of any custom frame builders in SA, steel, alu or Carbon - mtb and road!?!? Or local courses one can do to learn!?!? Get hold of that guy who has been doing the historical articles for Ride. He seems to know that kinda stuff. Link to comment Share on other sites More sharing options...
EigerSA Posted August 12, 2011 Share join a frame making forum and remember... youtube's your friend Link to comment Share on other sites More sharing options...
bontie Posted August 12, 2011 Share I think one of the last true framebuilders in SA is Francois du Toit. www.dutoitcycles.co.za Pretty keen to weld a frame myself - think it will be a cool project...and cheaper than a Pegoretti Link to comment Share on other sites More sharing options...
Chubba Posted August 12, 2011 Share Anybody know of any custom frame builders in SA, steel, alu or Carbon - mtb and road!?!? Or local courses one can do to learn!?!?for my own interest, why would you want a custom built frame? Link to comment Share on other sites More sharing options...
yeboabe Posted August 12, 2011 Share for my own interest, why would you want a custom built frame? Why not? and you get to choose all the good parts that work for you!! Link to comment Share on other sites More sharing options...
Chubba Posted August 12, 2011 Share Why not? and you get to choose all the good parts that work for you!!the parts i understand, the frame not. Link to comment Share on other sites More sharing options...
AndreZA Posted August 12, 2011 Share for my own interest, why would you want a custom built frame? Then you can get the frame to be perfect for your body. If you have long legs then you can get a bigger frame with short top tube. Or you like a more relaxed head angle. Alot of things can be changed if you go custom. Link to comment Share on other sites More sharing options...
Chubba Posted August 12, 2011 Share Then you can get the frame to be perfect for your body. If you have long legs then you can get a bigger frame with short top tube. Or you like a more relaxed head angle. Alot of things can be changed if you go custom.now i understand. fair point. Link to comment Share on other sites More sharing options...
Johan Bornman Posted August 12, 2011 Share You have many bridges to cross but if you are determined, you'll get there. Some pointers. 1) Don't worry about a framebuilder quitel yet. These okes now all have other jobs and getting them to build you a frame is al mission. They are no longer plugged into sourcing stuff and can't give a damn about your sizing etc. But don't give up. 2) Start with the components you want. Go to Ceeway, I think their website is www.framebuilder.com. Perhaps even Ceeway.com. Get an idea of the stuff that is available. Like I said, the framebuilder you eventually find wont even have internet, so just do all the research yourself. 3) Buy your stuff from Ceewaty once you've decided and buy two tubesets - one cheapo and one that you like, like Columbus Neuron or whatever. 4) Open your parcel and play with your lugs. Go to Youtube and look up how to mitre the tubes. Do it on the cheap tubeset. It is quite a skill and you'll no doubt mess up your first one. 5) Now decide on your geometry. When I did my frame I simply copied an existing bike's angles and added to it. The bit I added was extra-long chainstays and extra-deep reach brakes. This would allow me to fit panniers as well as large tyres. The geometry is a mysterty at first but once you've discovered that the lugs are "flexible", you're a for away. I say flexible but basically the tubes are loose-fitting so that you can braze in the angle that you want. 6) Check the American framebuilder websites and work done by the okes at the Framebuilders Guild. Now order more stuff from Calfee. Add extra braze-ons, prettier lugs etc. 7) Now take a bottle of whisky and go to Cape Town or one of these zuhaa places and find your framebuilder. Lure him out of his comfort zone with money and said bottle. Tell him he doesn't have to think, just set up and braze. Get him to practice on the cheapo tubes first. 8) Now find a painter that can mask and paint lugs. When you have found him/her, let me know. I still have some spare lugs and maybe even pieces of tube left over from my similar project. You are welcome to borrow/take/inspect these for inspiration. But remember, don't let the lack of a framebuilder stop you. You will find one but you have lots of homework to do first. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now