smerds Posted September 19, 2011 Share Thinking of building parts over to a new road frame, Giant TCR Advanced. I have discovered that the new frame takes a press fit BB and also comes without a headset. I have ultergra 6700 groupset and would like to know what press fit BB will suite the frame best since I have no experience on this. Also what will be a decent head set ...... and what should I roughly pay for these items. Looking for fairly decent items but not over the top since I have ultegra and not dura-ace ... Thanks Link to comment Share on other sites More sharing options...
Edge_Design Posted September 19, 2011 Share Get an Ultegra 6700 pressfit crank then? I would love it if you bought my brand new 105 5700 pressfit crank, but won't match your groupset... Any headset bearings from your LBS should do the trick, don't think there's really that much in a headset to worry about. I'm not sure about costs, but retail probably around R2,5k for Ultegra and R2k for 105 with the BB I'd guess (just an estimate). Edited September 19, 2011 by Edge_Design Link to comment Share on other sites More sharing options...
smerds Posted September 19, 2011 Share Get an Ultegra 6700 pressfit crank then? I would love it if you bought my brand new 105 5700 pressfit crank, but won't match your groupset... Any headset bearings from your LBS should do the trick, don't think there's really that much in a headset to worry about. I'm not sure about costs, but retail probably around R2,5k for Ultegra and R2k for 105 with the BB I'd guess (just an estimate). I was under the impression that I will be able to use my existing cranks with the press fit BB ….? Link to comment Share on other sites More sharing options...
Edge_Design Posted September 19, 2011 Share I was under the impression that I will be able to use my existing cranks with the press fit BB ….? Not as far as I know as the axle (forgive me if this is incorrect termonology ) would be a different length if there is an internal/pressfit BB versus an external BB as there is a different space between the crank arms. I am not a bicycle technogeek so hopefully someone else will confirm this for you though! If they are the same then I've just wasted a whole lot of money buying a new crank! Link to comment Share on other sites More sharing options...
FrankTank Posted September 20, 2011 Share Also busy with a Giant TCR Advanced bike build. The Giant TCR Advanced has a BB86 Bottom Bracket shell inside diameter 41mm, shell width of 86.5mm and axle diameter of 24mm. Something like this will work with your Shimano Ultegra 6700 crankset:http://www.cwcycles.co.za/product/first-pressfit-bb-t86-bkhttp://www.competitivecyclist.com/product-components/2011-shimano-bb86-bottom-bracket-road-6758.19.1.html BB86 Service Instructions:http://www.parktool.com/blog/repair-help/bb90-bb86-bb92-etc-bottom-bracket-service Shimano Press-Fit BB Technical Docs: (*First two PDF results)http://www.google.co.za/#sclient=psy&hl=en&source=hp&q="press-fit+bottom+bracket+adapter" Link to comment Share on other sites More sharing options...
FrankTank Posted September 20, 2011 Share Not as far as I know as the axle (forgive me if this is incorrect termonology ) would be a different length if there is an internal/pressfit BB versus an external BB as there is a different space between the crank arms. I think you are wrong... http://www.sram.com/truvativ/products/truvativ-pressfit-gxp-bb "A variant of the external bottom bracket, PressFit cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank — spindle length and diameter remain the same." Link to comment Share on other sites More sharing options...
Eldron Posted September 20, 2011 Share One of these should work with your existing cranks - if the shell width is right... http://www.chainreactioncycles.com/Models.aspx?ModelID=54842 Link to comment Share on other sites More sharing options...
andretraut Posted September 20, 2011 Share A press fit or BB30 frame can accommodate a standard GXP crank with the help of a BB adaptor, however a BB30 crank will never fit a standard GXP frame. Get an adaptor and your are sorted. Edited September 20, 2011 by andrè traut Link to comment Share on other sites More sharing options...
smerds Posted September 20, 2011 Share phew .... thanks guys was not looking forward to buying a new crank .... rather want to save on the crank and see if I can "make the wallet bigga" and get the SL .... ya ya in my drome ..... Link to comment Share on other sites More sharing options...
Johan Bornman Posted September 20, 2011 Share Get an Ultegra 6700 pressfit crank then? I would love it if you bought my brand new 105 5700 pressfit crank, but won't match your groupset... Any headset bearings from your LBS should do the trick, don't think there's really that much in a headset to worry about.I'm not sure about costs, but retail probably around R2,5k for Ultegra and R2k for 105 with the BB I'd guess (just an estimate). If that were the case our lives would be so much easier. Those of us who live in workshops, in anyway. Headsets are a nightmare deluxe. There are several frame head tube diameters. Then there are internal, external and a little-bit-of-both headsets. Lately the tapered thing added to our woes. Finally, dont forget about the different bearing standards. There is 36/45 degree and 45/45 degree. On top of that, the bearings could be 6 or 7mm high. I forgot to add - Cannondale does its own thing with non-angular contact bearings too. That's a saga on its own. A good headset service kit would comprise a set of angle and width templates, bearings of all types, shims, several types of compression rings and many types of crown races. The best advice I can give is to buy a new headset for the correct frame diameters and, make sure it is a standard headset in that it uses 36/45 degree bearings (45/45s look the same but cost 3 times more) made by TH Industries. Then you future bearing replacement should only cost R50 each instead of say R270-00 for those stupid Richey 45/45 bearings. Edited September 20, 2011 by Johan Bornman Link to comment Share on other sites More sharing options...
Sharkie 2 Posted September 20, 2011 Share You can get adapters for any crank these days even BB30 and they are not nearly as heavy as they use to be Link to comment Share on other sites More sharing options...
smerds Posted September 20, 2011 Share If that were the case our lives would be so much easier. Those of us who live in workshops, in anyway. Headsets are a nightmare deluxe. There are several frame head tube diameters. Then there are internal, external and a little-bit-of-both headsets. Lately the tapered thing added to our woes. Finally, dont forget about the different bearing standards. There is 36/45 degree and 45/45 degree. On top of that, the bearings could be 6 or 7mm high. I forgot to add - Cannondale does its own thing with non-angular contact bearings too. That's a saga on its own. A good headset service kit would comprise a set of angle and width templates, bearings of all types, shims, several types of compression rings and many types of crown races. The best advice I can give is to buy a new headset for the correct frame diameters and, make sure it is a standard headset in that it uses 36/45 degree bearings (45/45s look the same but cost 3 times more) made by TH Industries. Then you future bearing replacement should only cost R50 each instead of say R270-00 for those stupid Richey 45/45 bearings. tnx johan that is great input Link to comment Share on other sites More sharing options...
Edge_Design Posted September 20, 2011 Share Oh well, good for you I was wrong! Sorry about that... When I said any headset from your LBS will work, I meant go and ask them for one and I'm sure they can sort you out, i.e. don't stress about what brand it is. Link to comment Share on other sites More sharing options...
smerds Posted September 20, 2011 Share no worries edge design .....that is why this website is so great for information. Link to comment Share on other sites More sharing options...
Johan Bornman Posted September 20, 2011 Share Oh well, good for you I was wrong! Sorry about that... When I said any headset from your LBS will work, I meant go and ask them for one and I'm sure they can sort you out, i.e. don't stress about what brand it is. Aag chill China! Depending on your mood and insecurities, you can take my comments up many ways. Generally I focus on the issue at hand and remain reasonably benign. That was certainly my inention here. Link to comment Share on other sites More sharing options...
FrankTank Posted September 26, 2011 Share Smerds - This video explains the BB86 of the Giant TCR Advanced: http://www.youtube.com/watch?v=AftPKuX_tyo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now