Hairy Posted October 11, 2021 Share 4 minutes ago, TNT1 said: Anybody have a 32 hole MTB rim in straight and round condition they no longer need? I need to do a rebuild, and the lab says no stock of anything. 26, 27.5 OR 29" Link to comment Share on other sites More sharing options...
117 Posted October 11, 2021 Share 18 minutes ago, jokerman923@gmail.com said: Hi there, Im looking for a remote lockout that will fit my Rockshox Reba. I bought it with the shock bit installed, but not the remote switch. Any help/advice woukd be appreciated 0827760204 I'm looking for a manual lock out tab thingy for a rock shock gold 30. I have the remote system but want to dump it to clear the cockpit clutter. We can trade if you find me one of them Link to comment Share on other sites More sharing options...
TNT1 Posted October 11, 2021 Share 1 minute ago, Hairy said: 26, 27.5 OR 29" Ah, been a long Monday. 29. Link to comment Share on other sites More sharing options...
RobertWhitehead Posted October 13, 2021 Share Does anyone have a busted up right hand side Campag super record STI lever as per the kiekie? My friend broke his last night It doesn't have to be busted up it can be a replacement as well. It's a 10 speed Edited October 13, 2021 by RobertWhitehead Added some more options Link to comment Share on other sites More sharing options...
Jewbacca Posted October 13, 2021 Share On 10/11/2021 at 2:24 PM, TNT1 said: Ah, been a long Monday. 29. I have 4..... But I'm in Cape Town. I think I have an old Crest, a Nukeproof 29mm ID and a set of 2 x roval alu narrow ones. Let me know if you need one and we can courier or find a lift Link to comment Share on other sites More sharing options...
Jewbacca Posted October 13, 2021 Share On 10/11/2021 at 2:03 PM, jokerman923@gmail.com said: Hi there, Im looking for a remote lockout that will fit my Rockshox Reba. I bought it with the shock bit installed, but not the remote switch. Any help/advice woukd be appreciated 0827760204 I have a rockshox dual remote. I've also seen a few poploc variants for sale for 300zar ish. Pop me a message if you would like the dual Link to comment Share on other sites More sharing options...
madmarc Posted October 13, 2021 Share 37 minutes ago, RobertWhitehead said: Does anyone have a busted up right hand side Campag super record STI lever as per the kiekie? My friend broke his last night It doesn't have to be busted up it can be a replacement as well. It's a 10 speed I'm wondering if that could be repaired. I had 4 Campy FD where the plastic end part on the cage had broken - out of options other than ordering a complete cage i decided to go down the repair rabbit hole. used a Dremel with 1.0mm drill and drilled some holes on both broken parts opposite each other - superglued the parts together to make sure they were lined up (Super glue doesn't fix or adhere strong enough BTW) pulled a strand out of a carbon weaved matt which is part of my carbon repair kit and threaded it through the holes a few times and tied it off - used the carbon repair resin and then wrapped it tight with electrical tape - left it overnight. next day i filed it all clean and painted it black - I swear the fix is stronger than the original considering the cage takes a fair amount of hammering and a few jammed chains during changing - they all still going strong after 4 years. Link to comment Share on other sites More sharing options...
BogusOne Posted October 13, 2021 Share 44 minutes ago, RobertWhitehead said: Does anyone have a busted up right hand side Campag super record STI lever as per the kiekie? My friend broke his last night It doesn't have to be busted up it can be a replacement as well. It's a 10 speed I have a lever from a newer shape of Centaur shifters. Dont know if it will fit or work but you are wellcome to have it mahalla as i have no use for it. Im down in Cpt so you just need to cover the shipping to you.... ???? Link to comment Share on other sites More sharing options...
RobertWhitehead Posted October 13, 2021 Share 5 minutes ago, BogusOne said: I have a lever from a newer shape of Centaur shifters. Dont know if it will fit or work but you are wellcome to have it mahalla as i have no use for it. Im down in Cpt so you just need to cover the shipping to you.... ???? Fantastic, thank you very much. I will gladly take it off your hands. BogusOne 1 Link to comment Share on other sites More sharing options...
RobertWhitehead Posted October 13, 2021 Share 8 minutes ago, madmarc said: I'm wondering if that could be repaired. I had 4 Campy FD where the plastic end part on the cage had broken - out of options other than ordering a complete cage i decided to go down the repair rabbit hole. used a Dremel with 1.0mm drill and drilled some holes on both broken parts opposite each other - superglued the parts together to make sure they were lined up (Super glue doesn't fix or adhere strong enough BTW) pulled a strand out of a carbon weaved matt which is part of my carbon repair kit and threaded it through the holes a few times and tied it off - used the carbon repair resin and then wrapped it tight with electrical tape - left it overnight. next day i filed it all clean and painted it black - I swear the fix is stronger than the original considering the cage takes a fair amount of hammering and a few jammed chains during changing - they all still going strong after 4 years. That's exactly what I told my friend as well. I actually suggested using an aluminum plate on the inside over the break along with some Epoxy ???? Link to comment Share on other sites More sharing options...
madmarc Posted October 13, 2021 Share 56 minutes ago, RobertWhitehead said: That's exactly what I told my friend as well. I actually suggested using an aluminum plate on the inside over the break along with some Epoxy ???? If you got that right with some Al plates, screws and resin - you would officially qualify as a Campy Orthopedic Surgeon ???? Link to comment Share on other sites More sharing options...
brendank30 Posted October 13, 2021 Share Hey fellow Hubbers. Hoping you can help. I need a 27.2mm 400m seat post. Doesn't need to be anything fancy, it's for a commuter build. Link to comment Share on other sites More sharing options...
Jewbacca Posted October 13, 2021 Share 27 minutes ago, brendank30 said: Hey fellow Hubbers. Hoping you can help. I need a 27.2mm 400m seat post. Doesn't need to be anything fancy, it's for a commuter build. Drop me a message Link to comment Share on other sites More sharing options...
NickGM Posted October 13, 2021 Share Hi folks, I'm looking for a shim/adapter to allow me to mount a 34.9mm derailleur clamp on a 28.6mm tube (ok my calipers said 29.3mm but I'm guessing that's paint as 28.6 is the standard size?). I've heard that you can make them out of aluminium cans, but I may as well try to get the real thing before going the McGuyver route. Apparently they used to be supplied with the FD if you bought one new, so I'm sure there are some lying around in drawer a man-cave somewhere. Thanks! oh and technically I need 2 of them. Link to comment Share on other sites More sharing options...
Joshua1 Posted October 13, 2021 Share Hi folks, I am looking for a rear hanger for a GT ZR 3.0 road bike. Any one have laying around or know where I can track one down? Link to comment Share on other sites More sharing options...
100Tours Posted October 13, 2021 Share 5 hours ago, NickGM said: Hi folks, I'm looking for a shim/adapter to allow me to mount a 34.9mm derailleur clamp on a 28.6mm tube (ok my calipers said 29.3mm but I'm guessing that's paint as 28.6 is the standard size?). I've heard that you can make them out of aluminium cans, but I may as well try to get the real thing before going the McGuyver route. Apparently they used to be supplied with the FD if you bought one new, so I'm sure there are some lying around in drawer a man-cave somewhere. Thanks! oh and technically I need 2 of them. somewhere in a toolbox I have those. let me know if you want them shipped? NickGM 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now