Edge540 Posted May 20, 2018 Share Has anyone encountered a problem with Rockshox paint flaking off. This fork is roughly 2 years old and recently the paint seems to start bubbling first and then flakes off. It appears to be a sort of corrosion and yes I do live on the coast but even so this can't be normal. As can be seen in the pics it's not starting from chip marks and I like to think I look after my stuff reasonably well. Anyone encountered this before? Link to comment Share on other sites More sharing options...
Iwan Kemp Posted May 20, 2018 Share That doesn't look right and / or like the original paint job. Have never seen anything like that. Was the fork bought aftermarket or did it come OE on the bike? Link to comment Share on other sites More sharing options...
Maximis Posted May 20, 2018 Share Never seen that before... Could it be the cleaning solution fluid you are using? The fork on my old bike started fading and it became badly discolored. I checked my cleaning fluid and I wasn’t diluting it correctly - was almost using it concentrated rookie error that i learned from. I’m also on the coast so I don’t honk it’s that... Link to comment Share on other sites More sharing options...
Edge540 Posted May 20, 2018 Share It's not the original fork but was bought new as an upgrade. I hadn't thought of cleaning fluid, using Nam bike wash or the Sportsmans bike wash. Guess I may be in for a Bogus job in the not too distant future Link to comment Share on other sites More sharing options...
PhilipV Posted May 20, 2018 Share Sram brakes. What are the odds that you or a bike shop spilled some brake fluid on it? Sram runs Dot brake fluid, very corrosive and nasty stuff that. MrJacques and peetwindhoek 2 Link to comment Share on other sites More sharing options...
Edge540 Posted May 20, 2018 Share I guess that's also a possibility but it's not localized, it's doing it both sides inside and out so I doubt that's it. Link to comment Share on other sites More sharing options...
ichnusa Posted May 20, 2018 Share First thought: brake fluid Link to comment Share on other sites More sharing options...
Capricorn Posted May 20, 2018 Share is that revelation sticker on skew or is that just the photo angle that makes it seem that way.Bit unusual. Is the bike stored anywhere near solvents, the fumes of which that could harm the paint? Link to comment Share on other sites More sharing options...
RiverInTheRoad Posted May 20, 2018 Share That's brake fluid as the others have said. Or something similar. Some mechanic spilled oil. The pattern appears as if something was "running/flowing" down the leg. Link to comment Share on other sites More sharing options...
Edge540 Posted May 20, 2018 Share I'm inclined to go more with cleaning products rather than brake fluid as it's on both legs inside and out and the crown. Now to find a decal kit so I can have it resprayed. Link to comment Share on other sites More sharing options...
ichnusa Posted May 20, 2018 Share Could be that a rag wet with brake fluid was used to wipe the shock lowers after spilling down the left leg... Edge540 1 Link to comment Share on other sites More sharing options...
V12man Posted May 20, 2018 Share Could be that a rag wet with brake fluid was used to wipe the shock lowers after spilling down the left leg...Modern dot fluid is paint friendly. Personally I would send that one back to sram for investigation as a warrantee claim. Capricorn 1 Link to comment Share on other sites More sharing options...
pista Posted May 21, 2018 Share A friend of mine fell on the Transkei beach and had a wave go over his bike.He washed it off at the hotel but a few weeks later his fork did something similar.His frame also had a few places where the corrosion started. Link to comment Share on other sites More sharing options...
BikeisLife Posted May 21, 2018 Share I'm inclined to go more with cleaning products rather than brake fluid as it's on both legs inside and out and the crown. Now to find a decal kit so I can have it resprayed.If you come right with decals, let me know. Also keen on getting some new decals. Edge540 1 Link to comment Share on other sites More sharing options...
capediver Posted May 21, 2018 Share Looks like typical aluminium corrosion caused by moisture getting under the paint .... if you scrape a little of the paint off there, you find white powder underneath...so it's bad paint job either as new or if re-furbished later which allowed moisture to penetrate paint. Edge540 1 Link to comment Share on other sites More sharing options...
Edge540 Posted May 21, 2018 Share Modern dot fluid is paint friendly. Personally I would send that one back to sram for investigation as a warrantee claim.While it would be wonderful to get a warranty claim I don't want to try my luck if it's something which I stuffed up, I know I've never spilt brake fluid but it is possible the LBS did while servicing. Maybe I should ask them to have a look and see if they think it's worth sending it to Sram especially considering it's around 2 years old. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now