Parma Posted May 20, 2020 Share Hello, I bought a Spez Diverge Comp to use as a road bike because i am comfortable with its geometry. I need to make it a bit faster for the road. Current:Chain rings - 32 / 48TCassette - 11 / 34T What would be required, change the chain rings to more teeth e.g 34 / 52T? or cassette to a 11 / 25T or 11 / 28T. Without having to change the front and rear mechs. Regards Clinton Link to comment Share on other sites More sharing options...
andreas17777 Posted May 20, 2020 Share I would change the chainrings to compact 50-34 or semi compact, 52-36 that said, your cassette will have big jumps when shifting, so for smoother shifting go to a 11-32 or 11-28 depending on the terrain you will cycle in. Link to comment Share on other sites More sharing options...
JA-Q001 Posted May 20, 2020 Share What crankset is on there now? The make will determine how easy it is. Ill leave the cassette as is, this leaves a good range for you to work with. Link to comment Share on other sites More sharing options...
ChrisF Posted May 20, 2020 Share 11 at the back stays the same in all your options ... thus no change in top-end. You need a larger ring in the front to gain top-end. Jip, theoretically possible to gain 10% top-end by going for a 10 at the back, after getting a new hub .... much cheaper to go larger in the front ... just remember that you may need a longer chain. Link to comment Share on other sites More sharing options...
Fat Boab Posted May 20, 2020 Share Do you genuinely spin out, often enough with 48-11? Link to comment Share on other sites More sharing options...
JulienR Posted May 20, 2020 Share I support the previous comments - you can go to a smaller cassette to get smoother transitions (11-28 should be enough given the 48/32 crank) I am not sure you need to change the crank as the difference between a 48T and 52T chainring is not that much and most of us are not brave (stupid?) enough to gain from the extra teeth... Link to comment Share on other sites More sharing options...
Underachiever Posted May 20, 2020 Share Hello, I bought a Spez Diverge Comp to use as a road bike because i am comfortable with its geometry. I need to make it a bit faster for the road. Current:Chain rings - 32 / 48TCassette - 11 / 34T What would be required, change the chain rings to more teeth e.g 34 / 52T? or cassette to a 11 / 25T or 11 / 28T. Without having to change the front and rear mechs. Regards ClintonHey Clinton Good advice from the Hubbers For info My gravel bike was specced with the typical Cx set-up in 2015 - 46/36 and 11/32 cassette. I also use it as a road bike (training), as well as real gravel travel After 4 years on the bike - I would stay with the 11/32 and opt for a 48T for high speed work on the tar, and a 32T inside ring for the steep stuff on the gravel or tar. ChrisF 1 Link to comment Share on other sites More sharing options...
David Marshall Posted May 20, 2020 Share The optimum gearing for a gravel bike depends on what you plan to do. I am a roadie and use mine on the footpaths and side of the road until I meet my group and then I want to stay with them on the tar. I have a 50/34 crank and a 28/11 cassette. If you plan to stay with a bunch don't go less than 50 up front. 48 will not cut it in a race. Remember it is not the difference between the 48 and 50 that you are up against. It is the big strong guys on the 53 (at around a 9% advantage) that you need to hang with. My next cassette will be a 32/11, just to cover the times I do proper gravel, although I have managed everything on the 34/28 combination so far. If you plan to do just gravel, more off road or touring your gearing needs will be different. Underachiever 1 Link to comment Share on other sites More sharing options...
Parma Posted May 20, 2020 Share Do you genuinely spin out, often enough with 48-11? Hi, Thx for the response. Its not so much on the 11 / 48 combination. Its moving towards the 32 / 34 combination that the spin out happens. Unfortunately i am not that strong a rider to use 11 / 48 most the time. I ride better times with my purely road bike and would also like to achieve that with my Diverge if it is possible without to much expense. Link to comment Share on other sites More sharing options...
Parma Posted May 20, 2020 Share What crankset is on there now? The make will determine how easy it is. Ill leave the cassette as is, this leaves a good range for you to work with. Thx for the response. Praxis Zayante crankset, 48/32T chainrings. Link to comment Share on other sites More sharing options...
Parma Posted May 20, 2020 Share The optimum gearing for a gravel bike depends on what you plan to do. I am a roadie and use mine on the footpaths and side of the road until I meet my group and then I want to stay with them on the tar. I have a 50/34 crank and a 28/11 cassette. If you plan to stay with a bunch don't go less than 50 up front. 48 will not cut it in a race. Remember it is not the difference between the 48 and 50 that you are up against. It is the big strong guys on the 53 (at around a 9% advantage) that you need to hang with. My next cassette will be a 32/11, just to cover the times I do proper gravel, although I have managed everything on the 34/28 combination so far. If you plan to do just gravel, more off road or touring your gearing needs will be different. Thx for the response. My cycling is all about fun and challenging my last time (i am past 5.0 by 0.2) on the specific route. I just feel that i need a little bigger chainrings to hang with my mates on the road. Link to comment Share on other sites More sharing options...
Parma Posted May 20, 2020 Share I support the previous comments - you can go to a smaller cassette to get smoother transitions (11-28 should be enough given the 48/32 crank) I am not sure you need to change the crank as the difference between a 48T and 52T chainring is not that much and most of us are not brave (stupid?) enough to gain from the extra teeth... Thx for the response. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now