DR ◣◢ Posted June 19, 2020 Share Hi all Will this work? I'm new to 12spd (still running 9) and I'm considering upgrading. No point doing this if I need new hubs or freehub. Looking at either a NX or GX cassette. Link to comment Share on other sites More sharing options...
droo Posted June 19, 2020 Share NX will fit, GX you'll need an XD driver. Easy enough to get hold of, and around R 1 500. Link to comment Share on other sites More sharing options...
DR ◣◢ Posted June 19, 2020 Share Thank you sir. I need to get in touch with you soon on a service for an older Lyrik Solo Air. Hairy 1 Link to comment Share on other sites More sharing options...
T-Bob Posted June 19, 2020 Share I'm running the same set up and it wasn't event an issue (in fact that is why I bought the NX set up). Been about a year and a half with not an issue. DR ◣◢ 1 Link to comment Share on other sites More sharing options...
DR ◣◢ Posted June 19, 2020 Share I'm running the same set up and it wasn't event an issue (in fact that is why I bought the NX set up). Been about a year and a half with not an issue. Did you do the BB and cranks too? I'm not sure how backwards compatible the new cranks and BBs are to the old threaded shells. Frame dates back to 2010. T-Bob 1 Link to comment Share on other sites More sharing options...
CAAD4 Posted June 19, 2020 Share Me three. I have a dislike for Proprietary parts, so when my NX cassette is done, I'll go with Sunrace, as I'm not going XD or microspline on my Pro 2's and Evo's. When 13 speed is launched, I might change my mind, but I doubt it. DR ◣◢ 1 Link to comment Share on other sites More sharing options...
Thug Posted June 19, 2020 Share I'm running full GX on my Rocket with a Sunrace cassette on a Hope hub. DR ◣◢ 1 Link to comment Share on other sites More sharing options...
DR ◣◢ Posted June 19, 2020 Share Thank you Mr T. It’s been a very long time. How are you? Link to comment Share on other sites More sharing options...
Thug Posted June 20, 2020 Share It has been, all well this side. Yourself? DR ◣◢ 1 Link to comment Share on other sites More sharing options...
T-Bob Posted June 20, 2020 Share Did you do the BB and cranks too? I'm not sure how backwards compatible the new cranks and BBs are to the old threaded shells. Frame dates back to 2010. I got the whole groupo' with 165 cranks and the Dub BB off CRC when you could nip around the geolocation issue. That went onto a 2019 Ripmo and the only stuff up was on my side not understanding the difference between boost and non boost cranks. I ended up buying a new 'boost' crankset for very little reason and promptly selling it on. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now