markelf

Hi guys, I have a Polar CS300, approx 2 yrs in use. In the last week it has started playing up. When in a ride & stopping (traffic lights etc) then setting off again it automatically reboots/resets itself. The screen shows the spinning hour-glass then returns to the std watch display. Painfully it does not file the ride upto that point. The watch does not indicate a low battery, nor is the wearlink battery an issue. I have done the reboot (5 button simultaneous reboot), which does not make any difference. Is there anything I can do to fix this without sending to Polar SA? In my small world this is a software problem and is Polars liability! Your comments/advise would be appreciated.

thanks gents. will sort my buddy out this weekend. much obliged!

1, 2 spacers???

Is a Sora 8spd compatible on a 9/10 spd freebody?

EA70 is the upgrade to the bullet proof Circuit. Haven't ridden this model but have the EA90SLX. Had 2 sets of Ciruits and my only advice would be - "if it's an Easton it's value..." Chain Reaction has them for R3377 and would guess the RRP oin SA would be around R4500'ish!

MuXmAn - "Oh so this is the reason they always crack...." with that rather loose statement you should change the name to "wiseman"...

yip, R3 with relaxed geometry's. cannot go wrong! life-time cervelo backing...cannot go wrong! i have read and heard cervelo reckon they don't even need the rear stays, however some ruling requires it. their chain stay, down tube etc have enough ridgidity not to need or effect the bike, stiffness or ride... thats my 10 cents. over and out!

be strong wisecrack and all the best with your recovery.

Be nice boys & girls others are listening... ...we not have only bianchi owners onboard! Veloce - nice machine you do have! how the ride end up?