Hi there, Model Fork: Fox 32 Float Performance w/ 15thru-axle, overdrive steerer, 140mm travel. (I realize this is not a high grade fork and for a 32 at 140mm its not as good as say a 32 at 100mm) Wheels and Tyres: Onza Ibex 2.25 and Giant stock S XC-2 Tyre Pressure front 22/23psi and rear 26psi (up or down a few depending) Fork Pressure: recommended around 75 (set to sag) currently at 95 (reason why below) and shock around 155. Current weight 77.5kg 6 turns from the right (rebound) Running the stock 75mm stem with 760mm bars and one large spacer above. I have been riding for just over a year so Singletrack technique always needs improving. Problem i'm having is down a long section of ST the bike handles great with pro pedal on both fork and shock. Feeling firm but controlled in the front. Body position seems good, elbows bent, weight not too far back and keeping pressure on the front wheel. Switchbacks downhill and cornering good at a decent speed. Keep in mind I have upped the fork pressure to 95 (too high surely?) With that I end a ride with around 3cm or so of space above my spacer no big drops or anything. When I put the fork and shock into fully open here is the problem: I feel way less in control of the front end, the shock compresses pretty deep just leaning on it even at 95 psi and round switchbacks and corners it almost dives into its travel. Feeling sketchy compared to half locked (pro pedal) mode. I have come off the front a few times its dived so much into steep stuff. The bike is a 2016 model and pretty new only a few months 6/7 old. No service to the fork or shock yet. I thought of ordering a volume spacer or two and playing around with that? As I would like to setup the fork based on sag rather than over filling it to 95psi. Otherwise could it just be i'm putting to much weight on the front end around corners? or bad technique? Appreciate the feedback? Thought i'd ask here before taking it in and asking the shop. Sean Fox 32 Float Performance w/ 15mm thru-axle, OverDrive steerer, 140mm travel
