mahleu

Other hub is in and works well.

Ok, I found another 32 hole hub in my box of bits so that is going on there.

With a preload adjuster the end cap would sit slightly further out yes? Maybe i'm just missing that.

Cool, I shall go on a road trip, I think Ballito is my closest. I have found a bunch of people on the net who have similar Roval issues, apparently there are many many end caps.

Both sides are a different fitting so cannot unfortunately.

It does seem to be non boost but I now believe the end caps are wrong. Any ideas where to get the right ones?

The thread there is the end of the thread sticking through the hub. The disc is flush.

OK, hard to see but whole wheel is a bit off centre towards the brake side.

It's tight but but I don't need to force the fork legs apart. Will take now Not yet, no.

I'm thinking some light filing on the brake mount may be the easiest option, looks less than 1mm and it's only in a small section.

Definitely TA. Shimano SM-R176-M. I have tried with another brand and same thing. It is. Writing on the outside. I did also try mounting it backwards just to see if it would give slightly more clearance.

Will do, from which angle? They don't fit the other way around. No idea, I assume the bearings (or something) screw in. End caps fit snugly, they came with the wheel.

Both non-boost Have both, they don't fit the opposite sides. Yes, touches even with no caliper.

Sorry to keep everyone in suspenders. Pics here. Disc is touching the brake mounts (on the fork). Have tried without caliper attached and same thing.

So I have a Fox F32 (Evolution series) and I have a nice carbon rim on a TA hub (looks carbon but could be a sticker). Everything should be happy but when I put them together the disk makes contact with the fork. I think about 1mm sideways and it would be fine. Other wheels are fine in the fork. Any suggestions? I can make a spacer for one side and grind down the opposite end cap but if there's a better way i'm open to ideas. I'll take some pics later. Using a very bent backup wheel in the mean time.