Juicy 3 bleed - sram video vs manual

[New Landy new life]

Just for interest sake - I was struggling to get rid of air in my rear breaks following the SRAM video guide for Juicy 3.

 

I then downloaded the instructions and low and behold, the video has the steps the wrong way round and when I followed the manual method, the air was gone.

 

So if anyone needs to do it the correct way, first read the manual and just refer to the SRAM video as a how to but not the sequence.

[TK-Sp3cialiSt]

I followed the video and had no problems

Edited May 11, 2014 by TK-Sp3cialiSt

[New Landy new life]

Worked for the front breaks but not rear with longer lines.

 

The video I followed showed first trying to suck bubbles from the calliper with the lever pulled to the handlebar.

 

Manual shows that you first push fluid from calliper to top syringe, then pull the lever, and then suck the bubbles from the calliper, remove syringe, fit screw, then release lever and suck bubbles from master cylinder.