McStoosh

Thanks Spoke, will rebleed using this and see if it works. really appreciate the help.

Thanks David. The bleed I did was on the remote. The post was working fairly well until I decided to tinker and bleed the remote system, so I am hoping it does not need a full service.

The reverb is a 2015 model and hasn't been ridden all that much. The return became a bit sluggish very recently, which I was hoping the bleed would sort out. I suppose it could use a service, but was hoping to avoid for a while due to cost. Thanks for the advice, it's much appreciated.

Hi Spoke, The return speed became slightly slower over time and I bled the system. After bleeding, the seatpost will now not drop at all. I did a bit of research and the only info I could find on this problem was 1) too much oil in system as a result of return speed dial being turned all the way in while bleeding; 2) trapped air. Not sure what to do now - only info I could get was to rebleed or to open the bleed valve on the seatpost to let out some oil. Any advice? Thanks.

Does anyone know of a good bike shop in the Toti area? I am having issues with my Reverb seatpost. Thanks.

Thanks, I'll check it out.

Hi, Heading to St. Francis for a week. Does anyone know of any trails in the area? Thanks.

Hey Paulo, I have used model paint (enamel) which worked really well. I had a small paint chip on the frame, and also had to cover a large area (about 10c coin size) on my fork leg. White and black, so colour match was not a problem.

Where can I get my hands on some?