gavinstevens2 Posted January 21, 2015 Posted January 21, 2015 Can someone please tell me what on earth the 'moveable' middle screw hole is for? And how would I stop it from rattling around under my cleat?
Butterbean Posted January 21, 2015 Posted January 21, 2015 It's for the often never used clear position retaining clip. There is a little grey clip you can screw in there that fits between the shoe and cleat to ensure exact placement when replacing cleats. I could never find a screw that fit, so just used tippex and marked the cleat position.
Butterbean Posted January 21, 2015 Posted January 21, 2015 Oh. And to stop it, just shove some epoxy or glue in there and it'll stop the rattling. Some paper jammed in there works too if you're bothered about the glue, but it comes unstuck in the rain.
gavinstevens2 Posted January 21, 2015 Author Posted January 21, 2015 It's for the often never used clear position retaining clip. There is a little grey clip you can screw in there that fits between the shoe and cleat to ensure exact placement when replacing cleats. I could never find a screw that fit, so just used tippex and marked the cleat position.That sounds complex. Is there a way to stop it from sliding forwards and backwards under my cleat? It's really annoying.
Butterbean Posted January 21, 2015 Posted January 21, 2015 If you look through this, you'll see the little grey thingy on all the shoe soles "pre cleat installation". http://www.lookcycle.com/media/catalog/product/p/0/p0152_040_keo.pdf
Recommended Posts
Archived
This topic is now archived and is closed to further replies.