Jump to content

anthemic

Members
  • Posts

    73
  • Joined

  • Last visited

Public Profile

  • Location
    Dublin
  1. What hubs are you running? My i9, Hope Pro2 and DT Swiss hubs all have options to add microspline freehubs without changing the entire hub/ wheel. Alternatively just replace the hub and rebuild into your existing wheel or look for a sunrace or similar 12sp cassette that will work with the HG free hub
  2. Can’t help regards seller but can tell you the OneTen is a phenomenal bike. I’m rebuilding mine into a bike for my wife and am slightly nostalgic about it. I love my Stage and my Reeb, but I’ve had my OneTen 7yrs now and it is more capable than I’ll ever be.
  3. Hi. I run a 120mm drop on my Stage. I’m 175 with a 76cm inside leg length. The advise I’d give is to get the most drop your saddle position allows. Each model of dropper will have a guide to choosing this but basically you measure the ideal height of your saddle at full extension, then subtract the seat height and height of the collar of the post. This will leave you with a range of drop to work with. I’m a bit conservative so I’d often go about 10-20mm less than what this figure provides. So many vids online to help you with more detail than the above.
  4. Nice bike! Love my Stage, and I recognise the paint job, I know who did that for ya! Love the black to green fade from the rocker arm. Enjoy.
  5. If it ain’t dirty it ain’t been used enough [emoji23]
  6. I have the OneTen in the earlier guise with no internal dropper option. I use the cable bosses on the top tube to run the dropper post cable, basically where the front deraileur cable would have gone. I use a fox transfer external post with the pulley/actuator on the left side of the bike.
  7. Tough question as it depends on how the bikes are set up. I’ve my 110 set with a 140mm Pike and 35mm stem with 780mm bars. It’s not a light rig 14kgplus but it’s robust as hell. I’ve had it on enduro tracks and bike parks My Stage is set with a 120mm Reba and 50mm stem, flat bars at 760mm and low stack height. I’ve not got it set up light as I prefer a more robust bike for stage races etc and I’m not a light fellow. They are both very capable bikes. The way I’ve set up my stage I’d say it’s comparable to the newer “down country” bikes but could easily be set up as a more race rocket ZC rig. The 110 as I have it is comparable most modern short travel 29er trail bikes
  8. After 5+ years of solid service including a diy repaint it’s time to hang up the OneTen. My Stage covers all aspects of Xc/marathon riding and I’m looking for something with a bit more travel to compliment it for bike park and back country days. I’ve loved this bike and it might see a re-imagining as project build if I can get my wife into MTB or I might give it to a friend on a long term loan or I might hang it on the living room wall for nostalgia [emoji23][emoji23][emoji23]
  9. I’m trying out reducing the air pressure for small bump sensitivity but I’m heavy so need the ramp up progression when the hits get bigger. Fork came with them in the kit so no harm trying. So far I like it
  10. Yeah I’ve a Stage for XC so my OneTen is set up for steeper stuff, 140mm fork, 40mm stem, 780 bars etc. Bike is more capable than I am that’s for sure
  11. Thanks! Yep, 140mm Pike with 2 tokens
  12. So the Oul OneTen was looking a little worse for wear so I decided to respray it. DIY job but I like the way it came out
  13. Finally got my Stage built and ridden. Took it to Clarens and loved it https:// Sent from my iPhone using Tapatalk
  14. Pre-ordered in Nov as 2016 stock not available. Delivery was due early Feb so delayed by 5-6weeks from production line. Trust me I've had my moments where I'd thought of other options. There have been a few hiccups along the way to say the least but mostly out of Pygas hands with freight agent delays and customs crap. Poor Cliff probably having nightmares every time he sees my name pop up on his messenger and the local dealer sick of the sight of me guaranteed. Sent from my iPhone using Tapatalk
  15. It's the production frame colour scheme for the Max. Parts spec I reckon chosen to show off After market parts. Would have gone more subtle myself and with the black not blue Hope stuff (green hope exclusively for sponsored Hope riders). Stage colours a little less "bond" than the Max. Spank in Balck with green accents would be nicer than full green. My frame got the "cleared customs status" this morning so hoping dealer gets it today. Been waiting since November!!!! Am like a kid before Christmas Sent from my iPhone using Tapatalk
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout