BC Cycles

[Smurfy]

No problems Eddie. Ek wag vir hom

Tx.

[Smurfy]

Bertus ,ek wil net dankie se vir die awesome service wat jy aan my padfiets gedoen het. Die fiets het soos n droom geloop op die DC. Ek kon teen 82.1km/h teen Op die Tradoux af free. Daar was nie n gesoek vir ratte nie, as mens die shifters raak skyf die ketting so vinnig dat jy moet kyk of die eintlik geskuif het. Awesome service once again. Nou vir die mtb conversion.    

[Wolfie1]

Bertus ,ek wil net dankie se vir die awesome service wat jy aan my padfiets gedoen het. Die fiets het soos n droom geloop op die DC. Ek kon teen 82.1km/h teen Op die Tradoux af free. Daar was nie n gesoek vir ratte nie, as mens die shifters raak skyf die ketting so vinnig dat jy moet kyk of die eintlik geskuif het. Awesome service once again. Nou vir die mtb conversion.    

Dis een groot plesier Eddie. 

Ons maak so.  

[cpelser]

Ek wil ook met julle ouens n fiets-storie deel:

 

My swaer het bietjie bad luck gehad met fietse die afgelope rukkie, en ek was op die uitkyk vir n fiets vir hom.

 

Ek kry toe laat een aand n Axis op Gumtree wat n ou vir baie goedkop laat gaan.

Hierdie outjie: http://www.gumtree.co.za/a-sports-bicycles-fitness/foreshore/axis-mountainbike-triple-butted-alloy-hardtail/1001210710400910349981909

 

Elk geval, die fiets se vurk was splinternuut, maar hy het omtrent 2000km gedoen in n jaar.

 

Vat die fiets na Bertus toe, vuil, nog nooit gediens nie en maar bietjie squeaky..

Ons besluit toe dat die Large raam te groot vir swarrie is, so ek koop toe op die hub n Mongoose medium raam.

 

Hier's die fiets voor die tyd:

http://i.ebayimg.com/00/s/NjAwWDgwMA==/z/~4gAAOSw1-RUajMc/$_20.JPG

 

 

Kyk ook die roesplekke op die rotor:

 

http://i.ebayimg.com/00/s/NjAwWDQ1MA==/z/Br8AAOSwKrxUajMj/$_20.JPG

 

Bertus doen toe maar soos gewoonlik MOER baie moeite, en kyk net hoe lyk die fiets!! 

 

http://i243.photobucket.com/albums/ff217/Re83L/20141205_205732.jpg

 

Kyk byvoorbeeld na die rotor:

http://i243.photobucket.com/albums/ff217/Re83L/20141205_2057171.jpg

 

 

Bertus het toe sommer die rotor afgehaal, met swart verf oorgesprei en terug gesit. Die rotor lyk nou beter as n nuwe een!!

 

Fiets loop ook nou beter as n nuwe een

Dis die klein details wat Bertus vir mens doen wat die wêreld se verskil maak!

 

BAIE BAIE dankie Bertus

 

 

 

[Wolfie1]

Good Morning Guys

 

I would like to start off today by saying THANK YOU VERY MUCH FOR ALL YOUR SUPPORT SINCE MAY THIS YEAR. Its been one amazing journey and spending it with you guys all supporting me in my venture means a hell of a lot.

 

I've met so many legendary guys and girls over the last couple of months servicing, fixing, building and maintaining bikes. It makes me very excited for next year. I cant wait. Hope that next year is even bigger and better with all of your support.

 

From a more personal point I would like to say that you guys must enjoy the rest during the holidays. Eat as much Christmas food as you can and spoil the family.

 

Travel safe and Keep your eyes open on the road during the festive time.

 

Merry Christmas and a happy new year From BC CYCLES and family     

[Smurfy]

Good Morning Guys

 

I would like to start off today by saying THANK YOU VERY MUCH FOR ALL YOUR SUPPORT SINCE MAY THIS YEAR. Its been one amazing journey and spending it with you guys all supporting me in my venture means a hell of a lot.

 

I've met so many legendary guys and girls over the last couple of months servicing, fixing, building and maintaining bikes. It makes me very excited for next year. I cant wait. Hope that next year is even bigger and better with all of your support.

 

From a more personal point I would like to say that you guys must enjoy the rest during the holidays. Eat as much Christmas food as you can and spoil the family.

 

Travel safe and Keep your eyes open on the road during the festive time.

 

Merry Christmas and a happy new year From BC CYCLES and family     

Thanks, enjoy your Xmas. I will be training for the Attakwas. Will book a service in the new year, just to make the suffering a little easier.  

[Wolfie1]

Hi Eddy

 

 I will be here over the holidays so if you run into some trouble let me know. My supplier does not close

[Wolfie1]

 

Hi Guys

 

Complements and good luck for the new year. I did see some of you guys over the holidays and some have been back for services. Good to see you again

 

I had some time off and wanted to build something for myself over the holidays. 

This is the new edition to the BC Cycles family. Single speed rigid.

Would at a later stage fit a cassette and jockey so that i can do some of the road events as well is some of the smoother trails. Have to add though that if you have "stopsels" that are suspect....you will loose them hitting the trails  

 

This year i decided to lift my prices a bit. But the workmanship will still be of high quality as per usual.

 

I have been blessed with a lot of work and would love to continue in the same fashion. The end of last year ended with a band and flooded my shop with services and repairs. Much appreciated

 

Fork service have been picking up nicely as well so looking forward to carrying on with that as well.

 

Gents enjoy your day and keep the rubber down.

 

Hope to see more of you mountain goats in the near future

 

Cheers

 

Bertus

[Wolfie1]

Finally all the detail and colors have been finished. Tested the bike over the weekend with a 100 km and its runs beautiful.

Also riding and practicing with the rigid to do the Argus

[Wolfie1]

Good day to all the good people

 

 

I have not been posting for such a long time...its not even funny.

I've been busy all the way up to the wedding with builds and new customers and spares that there was no time for the hub and all its antics.

 

You tend to miss the place if you haven't been on the web for a while.

 

So i am a married man and I've stopped working all of 2 weeks before to help the misses to get all the arrangement for the wedding done. Workshop had to be closed till i was back.

Doors are open and i cant wait so get back into the swing of things.

 

This week funny enough was busy with small repair jobs and minor problems on bikes but the weekend and following week is going to be very interesting.

My first carbon build will take place the weekend with a frame to frame build.

Cant wait for that...Will keep you posted on developments.

 

The future is looking good for BC cycles and i am hoping to put some more effort into my setup at home. I am in the process of having shirts made to be sold as well to help with more advertising and getting my name out there.

 

Saving up for custom build will follow to so that i can get into that as well.

So..i am looking forward to the rest of the year and see what i can all achieve for the year of 2015. My service will still be my focus point as well as my workmanship which kept me going all of last year.

 

Thanks for all your support. Looking forward to helping with all your mountain bike issues you might have.

 

To book your service or repairs please feel free to contact me on email or whatsapp.