warawowo Posted December 27, 2014 Posted December 27, 2014 Super excited to start building this awesome bike. Will post some photos as I progress. Already have160mm PikeReverb stealth dropper post Monarch plus rc3 debonair Planning aggressive all mountain bike. And wait to see what comes out!
Ryanpmb Posted December 27, 2014 Posted December 27, 2014 Here's the thread you're looking for... https://community.bikehub.co.za/topic/119246-post-your-pyga/
Brett Posted December 27, 2014 Posted December 27, 2014 Check the hole where the dropper hose comes out, just above the BB. I had trouble with building one as the hose just wouldn't go through the hole.
warawowo Posted December 28, 2014 Author Posted December 28, 2014 I had a big struggle as well. Used an old cable hose, put it through from the bottom. Disconnected the reverb lever, used a thin strip of duck tape to tie the two together. . Eventually got it through. Started first by disconnecting hose at the bottom of the post. That's supposed to be the easiest way but the connector did not fit through the hole
pista Posted December 28, 2014 Posted December 28, 2014 Awesome frame and going to be watching this build.
warawowo Posted December 28, 2014 Author Posted December 28, 2014 The hole for the reverb stealth hose
warawowo Posted December 28, 2014 Author Posted December 28, 2014 Easton haven 50mm stem. Funn fatboy handlebar. Love this combination and have it on my other 2 bikes as well
Recommended Posts
Archived
This topic is now archived and is closed to further replies.