Bomberman Posted August 31, 2016 Share Evening Hubbers. Need some advice here, I busted up my crank this weekend and need to replace it. I got a atlas raceface crank but its seems the shaft might be to long. The BB installed is a shimano 70 (I if I can remember correctly), and the old crank is a normal shimano 552. Will It fit? Thanks Link to comment Share on other sites More sharing options...
sakkiebomskok Posted August 31, 2016 Share Raceface crank generally fit into shimano bb. Might have to run spacers depending on frame. Just to take up the extra space. Link to comment Share on other sites More sharing options...
BaGearA Posted August 31, 2016 Share you have a BB72 and the previous one was a Bb52( slightly lower spec) both will ft yout crank and as mentioned above just use the correct amount of spacers Link to comment Share on other sites More sharing options...
Bomberman Posted August 31, 2016 Share you have a BB72 and the previous one was a Bb52( slightly lower spec) both will ft yout crank and as mentioned above just use the correct amount of spacersFound the problem, its a downhill crank 83mm. Gonna need a lot of spacers. Link to comment Share on other sites More sharing options...
droo Posted September 1, 2016 Share You'll need a Howitzer BB or similar. Link to comment Share on other sites More sharing options...
Bomberman Posted September 1, 2016 Share You'll need a Howitzer BB or similar.I think I would rather take it off and sell it, Would love to keep it. Now I need a extraction cap, anybody know where I can get one?http://cdn.hibike.com/image/product/KUS/KUS_RfKAU_Deus_04-07-il.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.