Muttley Posted January 29, 2017 Share Hi all, So I got given (indefinitely ) my brother in law's virtually brand new TACX Flow indoor trainer which I'd like to use with my MTB. He also has a MTB so he purchased the 28 inch wheel which is needed and it worked perfectly for him. When I tried to hook it up, I realised that it dosen't fit as it was causing the brake disc to touch my bike's frame when I tightened up the quick release. My LBS said that it won't work as my bike has the following: Roval Control SL 29 142+, DT Swiss Star Ratchet, XX1 driver body, 12mm thru-axle, 28h and that I would need to buy a new hub and have it put into the trainer wheel. This is what the trainer has:http://i446.photobucket.com/albums/qq183/marlin178/tacx_zpsrycxqlbd.jpg and what my bike has:http://i446.photobucket.com/albums/qq183/marlin178/DT_Swiss_12_x_142mm_Rear_Qr_zpsuf3wdwf3.jpg Question is: Do I need to get a whole new hub or is there a conversion kit of sorts available? I saw these on CWC- would they perhaps work? (Thru-axle adapter for x12mm (rear wheel) with cylindrical support for fixing the MTB´s with Taxc trainers) http://i446.photobucket.com/albums/qq183/marlin178/P-TRAINER%20ACCESSORIES-TRAIAC-TACX-T1709-----_1_zps14wd9hjy.jpgLink: http://www.cwcycles.co.za/product/tacx-trainer-adapter-x-12-axle Any other suggestions would be greatly appreciated! Thanks in advance! Edited January 29, 2017 by Loudpedal Link to comment Share on other sites More sharing options...
Bat Posted January 29, 2017 Share Don't know if it will work with a thru axle on the spec, but rather buy a cheap secondhand wheel which you only use for the IDT. Pieterlab1 and Muttley 2 Link to comment Share on other sites More sharing options...
madmarc Posted January 30, 2017 Share I have a TACX flow as well - So some advice Go find a cheap steel road bike or MTB to use. Everytime you remove the MTB to go ride you have to re-calibrate the TACX when you re-mount it. I used a 299 MAKRO special, was about 20 years old, only had 7 speed and it was perfect. any bike gearing will work as it has 13 tension levels you can set (-4 to +9) or you can set the output watts. Cool trainer - only wish they had an upgrade kit for it to be mounted to a tablet or laptop. Muttley 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now