foxy25 Posted February 19, 2017 Share Good day i need a bottom bracket for my Raleigh RC6000 but cant seem to find one around here. is there a replacement part for this one i had in. please see pic and advice. Link to comment Share on other sites More sharing options...
seven Posted February 19, 2017 Share Just google BB9915, or ISIS Drive BB. You should be able to find generics. Looks like its for FSA crank set? Link to comment Share on other sites More sharing options...
seven Posted February 19, 2017 Share Here you go: http://www.cwcycles.co.za/product/first-isis-drive-bb-mp61 Link to comment Share on other sites More sharing options...
LeoKnight Posted February 19, 2017 Share Here you go: http://www.cwcycles.co.za/product/first-isis-drive-bb-mp61And on sale at the moment, so maybe get to it sooner than later Link to comment Share on other sites More sharing options...
popcorn_skollie Posted February 19, 2017 Share Here you go: http://www.cwcycles.co.za/product/first-isis-drive-bb-mp61 Just make sure of your shell width. Your sample says a 68mm.The one CWC sells is a 73mm.Isis BB's cannot be spaced out like GXP or Hollowtech BBsYou need the correct width. Link to comment Share on other sites More sharing options...
foxy25 Posted February 19, 2017 Share Ok thank you all. i hope they can send it to me within this week as i wanted to do a race on this comming weekend. Link to comment Share on other sites More sharing options...
foxy25 Posted February 19, 2017 Share The one on CWC wont work. the size must be 68mm... any other ideas? Link to comment Share on other sites More sharing options...
cfcjim Posted February 19, 2017 Share Try Cycle Teknix 021 556 8207 or 021 761 099. They usually have a whole bunch of different BBs. Quite cheap too, and they'll ship. Link to comment Share on other sites More sharing options...
gongmech Posted February 19, 2017 Share ask them if they can get you a 68 on short notice. they probably have somewhere. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.