Schwalbe Rapid Rob

[udxcob]

Why are my Rapid Robs not holding air on a tubeless conversion, there is no visible air loss but they are losing 1 bar over night

[Pieter1]

I had the same issue a while back. I just inflated it again and then it was good.

[carbon29er]

Rapid Rob are the old Racing Ralph tread pattern without being tubeless ready. The beading may be an issue with a conversion or you may not have enough sealant in each tyre. Check out the video (http://www.notubes.com/helpcenter.aspx?video=3) on Stans site to make sure you have got sealant over both insides of the tyre.

[goya-goya]

Are you using a rim that can be used for tubeless?

[Ryanpmb]

Provided your rims are tubeless compatible they should work. My Racing Ralph & Rocket Ron needed to pumped up once or twice until they seated 100% and held air properly.

 

Don't let the pressure get to low, keep pumping them up. Once they are on properly they're awesome tyres!