applezunepod Posted February 6, 2008 Share Hi, I did a search of the forum and didn't find a answer so I'm posting. I'm looking for a CO2 inflator adapter that works off the unthreaded co2 cartriges, these are the same co2 cartriges that one puts in bb/pellet guns. My logic is that the bb co2 cartriges cost R7 each up the road while the threaded co2 cartriges cost R17, R20 or R25 in the cycle shops. I tired a few cycle shops but all they have is the threaded type. Anyone know where in joburg to find these? BTW I'm using a road bike (7bar), so 12mg co2 cartriges will do from what I'm told. applezunepod2008-02-06 03:05:20 Link to comment Share on other sites More sharing options...
hagar Posted February 6, 2008 Share http://www.greatdeal.co.za/shipping-policy-i-2.html?osCsid=2aadc01086d1dff003a9ea23d2 Marius posted this yesterday looks like a good deal maybe they got the thread less inflators check the website Link to comment Share on other sites More sharing options...
scotty Posted February 6, 2008 Share Top Peak have an unthreaded bomb version which can also take threaded and doubles as a pump , unfortunately as far as i know it only works with 16g. Link to comment Share on other sites More sharing options...
applezunepod Posted February 6, 2008 Share Thanks. Checked the site and the only thing they have that allow you plug co2 cartriges into are pellet guys Maybe having co2 cartridge on the road is a good idea, you can use it to inflate a tyre and then use it to shoot any bugger trying to rob you hehe...applezunepod2008-02-06 03:27:08 Link to comment Share on other sites More sharing options...
Marius Posted February 6, 2008 Share I got one that works vir Un-threaded CO2 bOMBS BOTH 12G and the 16gram. It's red and black, dunno what brand it is, bought it wat Willie's a year or so back. I'm pretty sure you can still find some. Will do a search to find out what I have, gimmy a few secs.. Link to comment Share on other sites More sharing options...
Marius Posted February 6, 2008 Share OK, FOUND IT: http://citybikes.com/itemdetails.cfm?catalogId=39&id=12128 Link to comment Share on other sites More sharing options...
applezunepod Posted February 6, 2008 Share Marius, where did you buy this? Did you order it from the US? I was hoping someone local would have a threadless compatible co2 inflator. Link to comment Share on other sites More sharing options...
Marius Posted February 6, 2008 Share I bought it from a LBS in CT : http://www.willieengelbrecht.co.za/ Dunno if they still have stock. Best to phone around or just look for another brand that uses un-threaded bombs, I'm sure there must be plenty. Link to comment Share on other sites More sharing options...
applezunepod Posted February 6, 2008 Share Phoned 5 or 6 shops here in Joburg so far and none have. Will try a few more... Link to comment Share on other sites More sharing options...
Marius Posted February 6, 2008 Share Maybe they don't know what they talking about. Maybe it's best to go into the shops and have a look around yourself, some BkeSHOP PPL are so damn clueless. Link to comment Share on other sites More sharing options...
scotty Posted February 6, 2008 Share Have you tried cyclelab or cajee's, they have quite a large stock. East rand TDF would also probably have. Link to comment Share on other sites More sharing options...
applezunepod Posted February 6, 2008 Share Found some by phoning more people. The problem I see now is that I can get a threadless adaptor for between R185 and R299 while a treaded adaptor starts at about R50. Suddendly saving money on the R7 threadless vs R17 theaded co2 cartrigde doesn't seem that much. Only after 11 co2 cartridges does the threadless co2 cartridge setup (price of adaptor + 11 cos cartridges) start being cheaper on the long run. From what I've seen the threaded adapters are smaller than the threaded ones which require a cartridges cover. What do you guys think? Link to comment Share on other sites More sharing options...
applezunepod Posted February 6, 2008 Share Finally found one at Cajees (eastgate, fourways didn't have) and one at morningside cycles. Cajees had the cheaper option. Link to comment Share on other sites More sharing options...
NotSoBigBen Posted February 6, 2008 Share Unless you gonna use cartridges to do general inflation as well as repairs on training rides, how many does one need? I always make sure that I have 2 available at any time for racing. Also carry a pump cause if those are used up so much time has been lost that it doesn't matter how long the 3rd, 4th ..... nth repair takes! I have probably only ever used 1 or 2 in a race for a puncture repair. Having said that I have also used a 'few' when getting frustrated with the inflation of tubeless conversions (don't even go to the 'it freezes the goop' stories cause I aint hearing it!). Link to comment Share on other sites More sharing options...
applezunepod Posted February 6, 2008 Share I've been riding for a few months and do about a short 9km morning ride on some quiet roads in my area. Haven't had a problem until this last week where I had a puncture on two days. Lucky I was on my was back home so didn't have to push very far. I've realised that I probably got these punctures from underinflating the wheels, and had pinch punctures from all the new holes in the road due to all the rain. Got a floor pump now as the little hand pump just doesn't (or maybe I couldn't) get 7 bar. Also got a saddle bag for the patch kit that I never took with me. So I'll use the co2 for flats on the road and the floor pump normally. Also right now I don't ride very far so maybe going the threaded route is ok. Link to comment Share on other sites More sharing options...
NotSoBigBen Posted February 6, 2008 Share Like I said mate on training rides I use a pump! Costs nothing Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now