Theodore Posted January 31, 2014 Share Hi there I figured this would be as good a place as any to ask the question... Would the following mount work for the Bryton Rider 50 cycling computer. Any advice please. If not I would appreciate some advice on where to get something similar for the Bryton. I know in the picture it shows it mounted above the stem, but I take it you can use it as a out front mount by simply putting it on the other side of the stem, rhat is also to say to flip it? thanks Link to comment Share on other sites More sharing options...
ivr32 Posted January 31, 2014 Share I would also like something like this, but for Bryton 40 Steven Knoetze (sk27) 1 Link to comment Share on other sites More sharing options...
Pieterg Posted January 31, 2014 Share Me too for the Bryton 50 Link to comment Share on other sites More sharing options...
Theodore Posted January 31, 2014 Share I would also like something like this, but for Bryton 40I came across this post just after posting mine. https://www.google.co.za/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CCoQFjAA&url=http%3A%2F%2Fwww.thehubsa.co.za%2Fforum%2Ftopic%2F126610-will-this-work-with-a-bryton-rider-40%2F&ei=aWPrUsqLD-GK7AbJg4HoBg&usg=AFQjCNGCpqd2OhAw2VLnEJR04AWuCUhd7A&sig2=NTVxYUWyj_DhQBVs2rgBAg maybe this helps? Link to comment Share on other sites More sharing options...
Waynehans Posted January 31, 2014 Share http://www.racewaredirect.co.uk/#/shop/4559567829/Bryton-Rider-50-Bar-Mount/6277454 alot of guys make out front mounts for the Brytons, but the Rider 50 uses a differnt mount, there arent many of them on the market Link to comment Share on other sites More sharing options...
MrJacques Posted January 31, 2014 Share The Bryton mount for the Rider 50 looks like this: http://www.racewaredirect.co.uk/communities/8/004/009/892/778/images/4596637288_450x600.jpg I have 3 normal mounts with my Rider 50 that I'm selling. I could sell one separately... Edited January 31, 2014 by Jacquers Link to comment Share on other sites More sharing options...
Theodore Posted January 31, 2014 Share http://www.racewared...r-Mount/6277454 alot of guys make out front mounts for the Brytons, but the Rider 50 uses a differnt mount, there arent many of them on the marketThanks. I would like to avoid ordering from abroad if possible. I you don't mind me asking, how is the rider 50 mount different? Link to comment Share on other sites More sharing options...
Theodore Posted January 31, 2014 Share The Bryton mount for the Rider 50 looks like this: http://www.racewared...288_450x600.jpg I have 3 normal mounts with my Rider 50 that I'm selling. I could sell one separately...Thanks Jacques but i'm looking for an out front mount specifically. it would be for my wife. she does not like the mount on the handlebar and her stem is too short to mount it to the stem Link to comment Share on other sites More sharing options...
T-Bob Posted January 31, 2014 Share There Raceware is the only one that is still on the market as Bryton have stopped making the 50 and the attachment is unique. I'm in the same boat, had a 40 that basically fitted all Garmin out fronts (barfly, aleero, k-edge). It's pretty pricey to be honest and I'm sure there is a better answer but you kinda need a guy with a bit of maths and a 3d printer to make it work. I'm very keen to find an out front as well. If it's specifically a 50 and out front, then Raceware is the only way to go. I've done a heap of looking and there is one other group of guys in the US that are doing it. Will try to find the link now. Link to comment Share on other sites More sharing options...
Shepherd Posted January 31, 2014 Share Thanks Jacques but i'm looking for an out front mount specifically. it would be for my wife. she does not like the mount on the handlebar and her stem is too short to mount it to the stem You could always get her a new bike to fit the mount... :whistling: :whistling: hahaha Good luck Link to comment Share on other sites More sharing options...
Theodore Posted January 31, 2014 Share You could always get her a new bike to fit the mount... :whistling: :whistling: hahaha Good luckWe just spent 33k on a bike! and DO'NT TEMPT ME! Link to comment Share on other sites More sharing options...
T-Bob Posted January 31, 2014 Share this was part of a thread that I started a while back about out front's and Brytons. Link to comment Share on other sites More sharing options...
Theodore Posted February 3, 2014 Share There Raceware is the only one that is still on the market as Bryton have stopped making the 50 and the attachment is unique. I'm in the same boat, had a 40 that basically fitted all Garmin out fronts (barfly, aleero, k-edge). It's pretty pricey to be honest and I'm sure there is a better answer but you kinda need a guy with a bit of maths and a 3d printer to make it work. I'm very keen to find an out front as well. If it's specifically a 50 and out front, then Raceware is the only way to go. I've done a heap of looking and there is one other group of guys in the US that are doing it. Will try to find the link now.thanks for the info! please let me know if you come across something. I will do the same. Link to comment Share on other sites More sharing options...
Theodore Posted February 3, 2014 Share this was part of a thread that I started a while back about out front's and Brytons.Thanks. Sorry I completely missed that Link to comment Share on other sites More sharing options...
T-Bob Posted February 11, 2014 Share At the current cost Racewares' out front is about R660 inc uninsured delivery from the UK and it's not really that good. I'm sure that we could find some one with a 3d printer that would knock out 3 or 4 mounts for the guys here that need them. Just need someone to draw up the 3d printer file and away we go! Another optionI thought was to actually make an adaptor that fits in the wider range of garmin / 3/4 twist mounts that are out there. Would be a disk with the std 50 mount on top and the std bryton / garmin connector on the bottom. Link to comment Share on other sites More sharing options...
Pipsqueak Posted June 3, 2014 Share http://reviews.mtbr.com/review-tate-labs-bar-fly-2-0 Barfly 2 will take a Bryton 40. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now