Vangar Posted October 10, 2014 Posted October 10, 2014 So crisis. One of the o rings on my Stans 3.30 hubs has split. Anyone have an idea of what size the o ring is or where in jhb i can get a replacement?
JXV Posted October 10, 2014 Posted October 10, 2014 http://www.notubes.com/Stans-Hub-Parts-C44.aspx If you pull out the old O ring and take it to a bearing/seal place they will match it up for you even if broken. Buy a few spares while you are there.
Tedster Posted October 10, 2014 Posted October 10, 2014 One of mine also damaged on the front wheel, should be able get one at bearing man. We have a bag with a lot of o rings in, used one of them not exactly the same size, but works fine.
straatvark Posted October 10, 2014 Posted October 10, 2014 I asked stans. It is 2mm*25mm and got today from Bearing Man. Stil a bit loose so I bought 24*2.5 as well to play with. Pity you are in Gauteng. I got loads spare now...
straatvark Posted October 10, 2014 Posted October 10, 2014 If really urgent: I used a thicker one from the coop temporary. It fid not go in, but cut the outer slice of by sliding a boxcutter around the aluminum
Vangar Posted October 10, 2014 Author Posted October 10, 2014 Thehub to the rescue. Thanks everybody. The current one is still in but just want to keep water out. Thanks a lot!
straatvark Posted October 10, 2014 Posted October 10, 2014 Mine was used while splitted for 3-4 dry rides. No problems...
straatvark Posted October 10, 2014 Posted October 10, 2014 Ok. You made me get up in install them. The 24 * 2.5mm is to thick. It is 25*2mm. Still loose and need to be very carefull when pressing it in. I bought 10 spare. Very cheap. ..
David Marshall Posted October 10, 2014 Posted October 10, 2014 You can use superglue on the broken one as a stop gap.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.