Jump to content

Rockshox foam rings.


JXV

Recommended Posts

Hi

 

Did a lowers service today on a 2nd hand reba (2011 spec, RL , dual air) that a friend bought off the hub.   The fork is in very good nick but the foam rings were virtually dry and little oil inside.  One of the foam rings had been pinched under the wiper seal on assembly and was damaged so I could not re-use it.

 

Second issue... my LBS gave me a Rockshox kit with 5mm foam rings but the shock had 10mm foam rings fitted and a 10mm deep space.    I gather there were a few different seal/wiper setups on these forks over the years .   So I soaked and fitted the new 5mm foam rings into the 10mm space.     Is this going to be OK?

 

Tks

Link to comment
Share on other sites

Should be fine, they are there to keep a little oil to lube the wiper seals.

I've even used a broken one till I could get more, I had no problems

Link to comment
Share on other sites

Not ideal, but it's unlikely to break anything.The foam rings are there to catch any dirt that gets in through the seals, and the 5mm ones will serve that purpose fine.

 

You can buy foam rings separately if it bothers you.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout