Benjamin Posted February 19, 2017 Share Struggling with ideal setup on FOX Factory CTD 120mm travel fork. I can't seem to get the thing to use its full travel. Even after reasonably tech rides, the O ring never gets past about 80 % of the way up the stanchion. Is this normal for this fork or should it run the full travel at times? Link to comment Share on other sites More sharing options...
BaGearA Posted February 19, 2017 Share 80% is pretty good overall . it means you still have some left if you hit a nasty drop or overshoot a jump, If its giving you harsh feed back drop the pressure a little and add another token. Link to comment Share on other sites More sharing options...
droo Posted February 20, 2017 Share Question 1 - how old is it and when was it last serviced? 2 - What sag are you running? Any volume spacers? 3 - To test travel, remove the valve core and compress to see if you get full travel - this will tell you if it's air pressure, a damper issue or some other interference in the lowers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.