Service DT Swiss Hubs

[paulvs]

anyone who has some tech docs or a nice how to and tools required?

 

Please MTB preferred...

 

[GoLefty!!]

no special tools are required.

 

To remove the freehub is easy. remove the skewer, turn the whesl so the cassette is facing up. Grip the 32T sprocket in both hands while holding the rim down firmly but gentlyunder your feet.

Now give a firm yank upward and it comes free from the hub (hence freehub)...

You'll see the star ratchet and can now proceed to access the bearings for the hub on the drive side.

The axle will fall free  and you can access the disc side bearing.

remove the seal, flush out with some degreaser, allow to dry, regrease and replace  the seal. Reassemble and go ride your bike.

[paulvs]

ta

[Racer X]

GoLefty got it right, follow his advice and refer to this link if you get stuck. Its got pretty pictures.

 

http://www.dtswiss.com/Service/Product-Documents.aspx

 

Choose your hubs and your away.