Jump to content

Recommended Posts

Posted

Ok before the flaming starts (and hopefully some advice), here's some background

 

Ive upgraded my Shimano Ultegra 9sp groupset to Campag record 9sp last year, still using the 9sp shimano cluster.

 

Yip it worked fine, but either the cluster and/or the chain are now worn.

 

So the question for the tech gurus are:

 

1) how much will it cost to change to 9sp campag body and cluster with chain

or

2) should i just replace shimano cluster with new campag chain

or

3) should i get JB to open up my record ergolever and put in a 10speed spring (or whatever need to replace to get a 10sp clickWink) and just upgrade - ill obviously will be a more expensive exercise seeing that i will need to change the rear derailleur tooCry

 

with a new bmcfan_baby due mid november, ill obviously have to curb the budget a bit

 

 

 

Posted

mmmmm... velo, that sounds good

 

care to eloborate on cheaply and specs of rear wheel etc ....

 

 

you welcome to mail me on jp (at) strandloperasap (dot) co (dot) za if you want

 

Posted

Ok before the flaming starts (and hopefully some advice)' date=' here's some backgroundIve upgraded my Shimano Ultegra 9sp groupset to Campag record 9sp last year, still using the 9sp shimano cluster.Yip it worked fine, but either the cluster and/or the chain are now worn.So the question for the tech gurus are:1) how much will it cost to change to 9sp campag body and cluster with chainor2) should i just replace shimano cluster with new campag chainor3) should i get JB to open up my record ergolever and put in a 10speed spring (or whatever need to replace to get a 10sp clickWink) and just upgrade - ill obviously will be a more expensive exercise seeing that i will need to change the rear derailleur tooCrywith a new bmcfan_baby due mid november, ill obviously have to curb the budget a bit

 

[/quote']

 

 

 

Don't bother changing to Campy. Shimano 9spd cassettes are much cheaper and easier to come by than Campy ones.

 

 

 

Also, don't worry about chain compatibility. A shimano 9spd chain will work just fine and, again, it's easier to find and cheaper.

 

 

 

Velo's right though: if you do want to upgrade to 10spd, chances are that a new derailleur won't be necessary.

 

 

 

 

Posted

There are lots of people who say that Campy 10spd shifters and derailer matched with a Shimano 10spd chain and cassette work perfectly.

 

 

 

I think there is a slight difference in the spacing of sprockets between Campy and Shimano 10spd, which means that your gear setting would probably have to be more accurate for the system to work well. In other words, there would be less room for error.

Posted

Jules has some good advice there. If its been working for you up till now then its probably better to stick with what you've got.

 

Nine speed campy spares aren't really available anymore yet you can buy a Shimano chain from Sportmans Warehouse if you have to.

Posted

GR8 stuff for all the info and advice u2

 

its much appreciated

 

 

ive decided to stick to 9sp and will get a new sh9sp cassete and chain!

 

 

PS: Velo - sent me info on that wheel you have, a man can never have too little back upWink

 

Posted

 

Ok before the flaming starts (and hopefully some advice)' date=' here's some background

 

Ive upgraded my Shimano Ultegra 9sp groupset to Campag record 9sp last year, still using the 9sp shimano cluster.

 

 

 

[/quote']

 

Where did you find a 9spd record group (last year) since they stopped making them in 1999? If the group was that old, I hope you got it dirt cheap!

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout