campag to shimano freehub body needed

[maffias]

Hi Guys,

 

I have purchased a set of Campagnolo Scirocco G3 wheels and I'm looking for a campag to shimano freehub body. reason for this is I want to use these wheels on my single speed project and only shimano sprockets and spacers are freely available.

 

Does anyone have anything lying around or that could help ?

[ren8gor]

I have a similar problem. Need to convert some Campy wheels for my SS. Spacers aren't a problem, but SS sprockets to fit Campy free body is a challenge

 

Any suggestions anyone?

Edited May 29, 2013 by ren8gor

[V12man]

I have a similar problem. Need to convert some Campy wheels for my SS. Spacers aren't a problem, but SS sprockets to fit Campy free body is a challenge

 

Any suggestions anyone?

 

Engineers blue and a dremel tool (alternately a lathe or milling machine) and some hand fitting, and you should be fine - just adjust the SS sprocket to fit the campy freebody - the differences are not huge - put a shimano cog against a campy one and you will see.

 

Note - I have never done this, but I have compared them side by side, and the differences are not huge.

[ren8gor]

Ja, this was the option i was thinking until the post came along. Interesting to see if anyone else had some ideas.

 

I currently have stripped an old Campy cassette. Some of the sprockets come attached to the titanium carriers 2 at a time. i have used them like that in the interim.

 

But it is a waste of a usable cassette.

 

So some Dremel tool work may be the only option.

Edited May 29, 2013 by ren8gor

[BogusOne]

Have plenty of campy sprockets laying around. What ratio you guys looking for?

[maffias]

@ BogusOne I'm looking for a 16T or 17T rear Sprocket. where did you buy your spacers and locking nut from to hold the sprocket in place ?

[BogusOne]

@ BogusOne I'm looking for a 16T or 17T rear Sprocket. where did you buy your spacers and locking nut from to hold the sprocket in place ?

 

Cool. PM me your address and ill pop some in the mail for you. Snail mail cool?

 

Lol regarding the spacers and lockrings hmmm thats why I have plenty off sprockets laying around. Old cassettes that I raided from my road days

[ren8gor]

Hi BogusOne,

 

Do you have any that are joined by the titanium carrier. Ie, 2 sprockets joined. I have stripped a good record cassette from a spare road wheel to obtain this.

 

If you have a discarded one lying around, i would love to grab it and return my cassette to its rightful place.

 

The 2 sprocket combo makes the "foot" thicker and less likely to bite into the free body.

[BogusOne]

Hi BogusOne,

 

Do you have any that are joined by the titanium carrier. Ie, 2 sprockets joined. I have stripped a good record cassette from a spare road wheel to obtain this.

 

If you have a discarded one lying around, i would love to grab it and return my cassette to its rightful place.

 

The 2 sprocket combo makes the "foot" thicker and less likely to bite into the free body.

 

Will take a look and see if i have. Think its mostly 9speed casettes. Will keep you posted

[CAAD4]

Cheapest kit that I know of. Bought one yesterday

 

http://www.rapide.co.za/pRAPIDE%20SINGLESPEED%20CONVERTER%20KIT%20AND%20SPROCKET/Rapide-Singlespeed-Converter-Kit-And-Sprocket.aspx#.UaXbE0CLCSo

[ren8gor]

Will take a look and see if i have. Think its mostly 9speed casettes. Will keep you posted

 

Thanks Much appreciated

[ren8gor]

Cheapest kit that I know of. Bought one yesterday

 

http://www.rapide.co...px#.UaXbE0CLCSo

 

Yep a mate bought one of these and they are indeed good value, but doesn't fit on a Campy free-body.

 

Unless of course it is "Dremmeled" to fit

[CAAD4]

Or these:

 

http://www.charlieth...--18t-904-p.asp

 

http://www.chainreac...x?ModelID=17776

 

http://www.wheelies.co.uk/p43329/Gusset-Campagnolo-1-er-Single-Speed-Cog.aspx

Edited May 29, 2013 by CAAD4

[maffias]

Hey guys thanks all for the info but a mate of mine gave me a campag to shimano freebody hub.

 

Thanks for all the help and assistance I am however going to order a set of sprockets from the attached links CAAD4 posted.

 

CAAD4 have you ever dealt with Wheelies ? thanks again have a great day will post pics of my project once its complete

[maffias]

PS if anyone had a set of STI style brakes lying around that you are not using pls let me know