Sram XX1 and GX compatibility

[OnlyFans]

Hi all, i have 2 bikes, bike A and B. I want to sell bike A that has an amazing - sram xx1 12 speed groupset (cassette, chain, derailleur and shifter)

My other bike, bike B has a GX 12 speed groupset .

My question is - can I take the derailleur and shifter ONLY from bike A (xx1) and fit it to bike B (gx) - and then take the parts from bike B and fit to bike A.

ie: can I run an xx1 derailleur and shifter with a GX cassette and chain….. or is it best to swap out complete groupsets. (The cassette/chain on groupset A (xx1) has about 65% life left, whereas cassette/chain on groupset B (gx) has about 90% life left.

Thanks in advance!

[Ivan Bergman]

SRAM 12 speed is SRAM 12 speed. The derailleurs and shifters are pretty much the same in terms of function and fit. So there wouldn't be any issues.

 

**Shifters, derailleurs, chains only. Cassettes may vary between sub-models like SX/NX

Edited June 6 by Ivan Bergman

[Scott roy]

100% all interchangeable in terms of what you propose. However I would change it all over, that xx1, even if more used will hands down outlast the gx cassette and chain

[DieselnDust]

5 hours ago, Ivan Bergman said:

SRAM 12 speed is SRAM 12 speed. The derailleurs and shifters are pretty much the same in terms of function and fit. So there wouldn't be any issues.

 

**Shifters, derailleurs, chains only. Cassettes may vary between sub-models like SX/NX

SRAM 12 speed EAGLE components are all interchangeable, not all SRAM 12 speed.