Westi Posted November 14, 2007 Share please help, is there anything i can adjust to fix this problem????? Link to comment Share on other sites More sharing options...
Brakkies Sport Fotos Posted November 14, 2007 Share same problem here. have the juicy 7 , i think. on saturday I tried to replace 2 pads. got it in, but the roter was stuck. so I replace one brand new and had to leave the "best" of the used pads in. Dunno how to get 2 new ones in and get is set to allow the rotor to move freely. Link to comment Share on other sites More sharing options...
NotSoBigBen Posted November 14, 2007 Share Westi - you may wanna specify make and model of brakes, I'm sure the sprocket rockets here need that to give advice! Just a thought, use it don't .........! Link to comment Share on other sites More sharing options...
#Pete# Posted November 14, 2007 Share Push the pistons back in with a tire lever or something... Link to comment Share on other sites More sharing options...
Mudsimus Posted November 14, 2007 Share Jip..just push the pistons back. Link to comment Share on other sites More sharing options...
CaptainDura Posted November 14, 2007 Share When replacing old pads with new pads the caliper needs to be depressed back in because the new pads are much thicker obviously. So when you spin your wheel the first couple of times without depressing the caliper in the pads will touch your wheel. After a very short while though just by using the brakes the calipers will compress far enough so the wheel can spin freely, if that makes any sense at all. Link to comment Share on other sites More sharing options...
NotSoBigBen Posted November 14, 2007 Share popeye, did my son's Juicy 5's recently, you gotta remove the old pads, then push the 'pistons' as far back as they can go, they almost look flush with the caliper on both sides. Fit new pads (don't touch the pad breaking surface or the rotor!) , important to now put the wheel back, then re-center the caliper, i.e. loosen the bolts that hold them on, now here's a trick :- Use a cable tie to put full pressure on the brake lever then tighten the bolts. Cut the cable tie, give it a squeeze or 2 and now go out and do the breaking in procedure as required (10 hard stops from a good speed should do it!). worked for me! Link to comment Share on other sites More sharing options...
MintSauce Posted November 14, 2007 Share Westi.....as the guys said, details please? Link to comment Share on other sites More sharing options...
Westi Posted November 14, 2007 Share SORRY BB, avid 3, XT rotars!!!! its not catching much but it isn't allowing the whell to rotate freely without resistance Link to comment Share on other sites More sharing options...
Brakkies Sport Fotos Posted November 14, 2007 Share so the problen is to push that "round" thing on the inside back? i'm still riding it with one new, one almost on metal. will try tonight. Link to comment Share on other sites More sharing options...
Mudsimus Posted November 14, 2007 Share SORRY BB' date=' avid 3, XT rotars!!!! [/quote'] There is your problem. They are not compatible. Link to comment Share on other sites More sharing options...
Marius Posted November 14, 2007 Share ***, even I know this and I don't have disc's// Link to comment Share on other sites More sharing options...
NotSoBigBen Posted November 14, 2007 Share so the problen is to push that "round" thing on the inside back? Yip that's it, just ease it back slowly (don't want everything shooting out the top at the levers or something!). As per the earlier suggestion a tyre lever works well as it won't 'hurt' anything! Link to comment Share on other sites More sharing options...
Westi Posted November 14, 2007 Share why are they not compatible? they 160mm and the front is unning smoothly Link to comment Share on other sites More sharing options...
Brakkies Sport Fotos Posted November 14, 2007 Share nou wat het maruis geweet wat ek nie geweet het? jy was by my in die hell toe ek gesukkel het, hoekom het jy nie gehelp. maar jy het mos net rond gehop op jou bicycle soos 'n mak aapie in 'n toe hok. Het julle hom al gesien as hy sy fiets by hom het... Hy sit en hopp heel middag op die ding. Link to comment Share on other sites More sharing options...
NotSoBigBen Posted November 14, 2007 Share Ok guys when it comes to compatibility its out of my league and as you know most (in fact all!) advice I give is anecdotal and in my personal experience so all standard disclaimers come into play! But Pop's that's how I've done both my Juicy 7's as well as my son's Juicy 5's more than once with no problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now