SURFER Posted June 20, 2011 Share I'm 1.76 and ride a medium, large is too big. stretched out toptube and not enough stand over hight. medium for different brands not the same. what is your medium in inches? Link to comment Share on other sites More sharing options...
davetapson Posted June 20, 2011 Share any bike site should have a sizing sheet: e.g. Sizing on my next dream bike!If the dude wants to be able to ride up hill, his bike shop should have shown him this:Sizing of bikes what can go up hill Link to comment Share on other sites More sharing options...
Iwan Kemp Posted June 20, 2011 Share medium for different brands not the same. what is your medium in inches? 17" on one bike not always 17" on another! Just to confuse matters further... Link to comment Share on other sites More sharing options...
Chubba Posted June 20, 2011 Share If the dude wants to be able to ride up hill, his bike shop should have shown him this:Sizing of bikes what can go up hillRoad bikes like hills! Link to comment Share on other sites More sharing options...
Clinton - theCOW Posted June 20, 2011 Share Fork sag could also be an issue with tracking I use to find my bike very twitchy on uphills, struggled to keep the front wheel down. I started buggering around with my fork setup, set the rebound to be slower, as in towards the turtle, 5 clicks, made technical climbs much better, less bouncy, front wheel spends more time on the ground now even with my weight/body where it use to be before. Link to comment Share on other sites More sharing options...
Bos Posted June 21, 2011 Share MBEE, Listen to me, these okes are making you deurmekaar.. Some peeps are just built different, Im not saying the size is right but im just 182cm but my seatpost is a mile high even on my large zula, cause I gots the legs like a supermodel OK long & skinny. BUT, that shouldnt have to much to do with the settup... what you probably do find is the headtube of your new frame is longer than your old bike, IOW the hight the stem is fastened on the steerer tube (the tube from the fork) is highter than previous. BUT your seat hight has stayed the same, because you just dropped your seat. SO, take all the spacers out underneath the stem, and for now put them on top (later cut the steerer shorter) If that still doesnt work, Flip your stem over to get it even lower. The sag etc on the fork has nothing to do with it. Its just that your centre of gravity is to far back and you have no weight on your front wheel. When I got my Zula I had a 120mm fork and 1' rizerbar. I found it climed terrible. as I mentioned I have a short upperbody, long arms and long legs, so I have a 100mm 9deg stem, flipped over, a 0 rize Bar and hardly any spacers under my stem. For most that might be to low, but because I hont sit to high(short torso) my centre of gravity remains OK. Complicated answer, I know, but I just thought Id give you the Full answer cause others might not agree with all because "It doesnt work for them" Take a look at BURRY STANDER'S bikes.. When He swopped over to a 29'er the bigger wheel did the same as your large frame wheel would have done to your bar hight. When He rode 26" HT his stem and bars looked pretty normal, but when swopping to the 29" ha had to resort to quite a hectic angled flipped stem..heres pics.. Link to comment Share on other sites More sharing options...
MJ the Expat Posted June 21, 2011 Share @Bos - That GT looks a lot like WeightWeenies bike. Link to comment Share on other sites More sharing options...
Headshot Posted June 21, 2011 Share Post a pic of you on the bike from the side as it is now. Your bike may not be too big (assumptions, assumptions!) and just needs a tweak. Bar height makes a huge difference on climbing - the lwoer teh better but you need to strike a balance for flat and DH work. Link to comment Share on other sites More sharing options...
Bos Posted June 21, 2011 Share @Bos - That GT looks a lot like WeightWeenies bike. Its when Burry stil rode a GT.Couldnt find a pic of his 26" spez, I was in a hurry but wanted to make a point, hehe Link to comment Share on other sites More sharing options...
MBee Posted June 21, 2011 Share Ok guys, clearly I bought the wrong size bike! bought it privately off the hub, so no refund for me. thanks for all the reponses and advice! Link to comment Share on other sites More sharing options...
MJ the Expat Posted June 21, 2011 Share Its when Burry stil rode a GT.Couldnt find a pic of his 26" spez, I was in a hurry but wanted to make a point, heheSooooooooooo, the we can assume that WW is actually Burry Stander??? Link to comment Share on other sites More sharing options...
gummibear Posted June 21, 2011 Share Ok guys, clearly I bought the wrong size bike! bought it privately off the hub, so no refund for me. thanks for all the reponses and advice! Put the frame in the classifieds and try and sell it or swop it. What frame is it? Link to comment Share on other sites More sharing options...
MBee Posted June 21, 2011 Share Put the frame in the classifieds and try and sell it or swop it. What frame is it?It's a Giant Anthem 3.bought it for the groupset which is XTR so want to keep that. Link to comment Share on other sites More sharing options...
MBee Posted June 21, 2011 Share MBEE, Listen to me, these okes are making you deurmekaar.. Some peeps are just built different, Im not saying the size is right but im just 182cm but my seatpost is a mile high even on my large zula, cause I gots the legs like a supermodel OK long & skinny. BUT, that shouldnt have to much to do with the settup... what you probably do find is the headtube of your new frame is longer than your old bike, IOW the hight the stem is fastened on the steerer tube (the tube from the fork) is highter than previous. BUT your seat hight has stayed the same, because you just dropped your seat. SO, take all the spacers out underneath the stem, and for now put them on top (later cut the steerer shorter) If that still doesnt work, Flip your stem over to get it even lower. The sag etc on the fork has nothing to do with it. Its just that your centre of gravity is to far back and you have no weight on your front wheel. When I got my Zula I had a 120mm fork and 1' rizerbar. I found it climed terrible. as I mentioned I have a short upperbody, long arms and long legs, so I have a 100mm 9deg stem, flipped over, a 0 rize Bar and hardly any spacers under my stem. For most that might be to low, but because I hont sit to high(short torso) my centre of gravity remains OK. Complicated answer, I know, but I just thought Id give you the Full answer cause others might not agree with all because "It doesnt work for them" Take a look at BURRY STANDER'S bikes.. When He swopped over to a 29'er the bigger wheel did the same as your large frame wheel would have done to your bar hight. When He rode 26" HT his stem and bars looked pretty normal, but when swopping to the 29" ha had to resort to quite a hectic angled flipped stem..heres pics..Thanks Bos, will give this a try first! Link to comment Share on other sites More sharing options...
gummibear Posted June 21, 2011 Share It's a Giant Anthem 3.bought it for the groupset which is XTR so want to keep that. Just get a new frame then. When i was looking for a frame i would have needed a small in the Anthem.The small is a 57.5 top tube and the medium is a 59.5 top tube. Link to comment Share on other sites More sharing options...
SURFER Posted June 21, 2011 Share It's a Giant Anthem 3.bought it for the groupset which is XTR so want to keep that. What is the height of your saddle from middle of BB to top of saddle? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now