steve61 Posted November 16, 2011 Share New seals "etc" won't cure bushing play. And your man "up there" will be Johan Bornman ! Bushes etc was what I meant by 'seals etc' .... my forks are 5yrs old with about 15 000km on them. Got serviced (badly) by agents in CT last year now oil leaks and lots of play!! Link to comment Share on other sites More sharing options...
reteid Posted November 16, 2011 Share ok not fox but rock shox and the shudder was gone after replacing front rotor. Link to comment Share on other sites More sharing options...
RedRover Posted November 16, 2011 Share I also have this exact same issue on my XTC 29er at the moment. Still trying to figure out where the problem lies. Same symptom on my XTC29er, new brake pads sorted the problem (and improved braking performance!) Link to comment Share on other sites More sharing options...
Bat-ass Posted November 17, 2011 Share This problem i dont think is the fork...... its the brakes shuddering under heavy braking. Link to comment Share on other sites More sharing options...
duringd Posted December 15, 2011 Share My 29er Anthem just picked up a shudder and guess.... yip! The FOX Shock! Now its holidays, nobody can fix it and just for fun I'm having to train for the ATTA! And I hear its not the first 29er Fox shock going busted within 1 year of rather rustige riding! Link to comment Share on other sites More sharing options...
Johan Bornman Posted December 15, 2011 Share My 29er Anthem just picked up a shudder and guess.... yip! The FOX Shock! Now its holidays, nobody can fix it and just for fun I'm having to train for the ATTA! And I hear its not the first 29er Fox shock going busted within 1 year of rather rustige riding! No need to take it in. Fix it yourself. 1) Sand the brake discs with course emery paper =- 80 grit or so. Work hard at it, sanding all along the front and rear part of the disc on the braking track. You want to end up with a dull satin finish. No shiny bits. 2) Now remove your brake pads and sand them using a much finer paper. Again, sand until you find no shiny bits. Place a sheet of water paper (waterproof sanding paper) on a flat surface and lay the pad on that, face down. Now sand with a Figure 8 motion until all shiny bits are gone. 3) Replace the lot and go and break in your brakes. Do this by perfoming a series of gentle stops totalling about three minutes all in all. Shudder will be gone. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now