ZTR wheet set,front wheel not centre

[DR ◣◢]

Dropout facing tool...

 

Sounds like Malema in his final year of primary school

 

Coffee, coffee everywhere...

[Captain Fastbastard Mayhem]

My pleasure guys... consider it my gift to you. I'm busy finishing a new couch for home. Will post pics in the "latest purchase" thread once done

[Sidmouth]

After checking the wheel at my LBS I discovered that.

 

1-Wheel was 100% Dished

2-the same wheel that is off center on my bike is centered on all other new bikes.

 

However the old or original wheel sits flush in the fork perfectly,

Besides the fork there is one factor that has changed.

 

The original wheel had a 9mm QR axle and this new wheel has a thin QR mechanism{old School type}, could this make the difference.

if I could get hold of the following I could test it? In fact the 9mm feels more solid and I would prefer it.

.http://www.notubes.com/9mm-Thru-Conv-for-ZTR330330Ti-Front-Hub-P1343.aspx

[Dicky DQ]

After checking the wheel at my LBS I discovered that.

 

1-Wheel was 100% Dished

2-the same wheel that is off center on my bike is centered on all other new bikes.

 

However the old or original wheel sits flush in the fork perfectly,

Besides the fork there is one factor that has changed.

 

The original wheel had a 9mm QR axle and this new wheel has a thin QR mechanism{old School type}, could this make the difference.

if I could get hold of the following I could test it? In fact the 9mm feels more solid and I would prefer it.

.http://www.notubes.c...-Hub-P1343.aspx

 

Those are to convert through axle to QR I think.

[Sidmouth]

Thats right, you just remove the axle cups and replace with the conversion kit,maybe it will make a difference, anyone know where you can get them, I have tried everyone in town, no one has.