What Oil Volumes for Fox F120 fork?

[DemitriN]

I'm about to service the fork on my Giant Trance x2 (2009 model) but can't figure out what oil volumes I'm supposed to use for the left and right sides. The fork is a Fox 32 F120RL with 120mm travel. Consulting the fox help files, http://service.foxracingshox.com/consumers/index.htm > Service > Oil Volumes, I can't find my fork listed in the tables. Any suggestions?

[David Marshall]

I think you have the FIT cartridge in that fork.  30 ml Fox green in each lowers and if you do the cartridge as well it takes 35ml Fox red if my memory serves me.  5ml Fox float fluid on the air piston.

[Spoke101]

I am know expert but would say your fork is No.20 on the Fox oil chart and this seams to confirm that.

PM droo sure he will know.

[Louis for real]

all i know is the 2009 fux forks did not have fit cartiges,must be open bath.

[Roshambo]

Looks like an open bath Float RL, no FIT cartridge. I think Fox only installed FIT in 2011 if I remember correctly.

 

Number 27 on the list would be my guess

[DemitriN]

Thanks for the help. My guess was to put 30ml oil in each of the lowers. But the fox table says to use 160ml on the one side and 30ml on the other.

[droo]

Thanks for the help. My guess was to put 30ml oil in each of the lowers. But the fox table says to use 160ml on the one side and 30ml on the other.

 

The table would be correct. That's an open bath damper, so you'll need 160 in the damper leg and 30 in the spring leg, with 5cc of float fluid on top of the air piston.