flyluis Posted January 12, 2015 Posted January 12, 2015 Hey dudes. Looking at changing the bearings on my look s track pedals but can't seem to pull off the sleeve that's in front of the bearings, anyone know how to take them off? Thanks.
fanievb Posted January 12, 2015 Posted January 12, 2015 They can't be removed. All you can do is clean and re-grease. If they are beyond repair get a new set as a service kit costs the same as the pedals.
Wayne Potgieter Posted January 12, 2015 Posted January 12, 2015 Hey dudes. Looking at changing the bearings on my look s track pedals but can't seem to pull off the sleeve that's in front of the bearings, anyone know how to take them off? Thanks.Pm me your address. I will send you a brand new pair still in the box.
Wayne Potgieter Posted January 14, 2015 Posted January 14, 2015 Woops. Turns out i have look quartz pedals.
Monark Posted January 14, 2015 Posted January 14, 2015 Agreed, service the S Tracks and they will look after you. If the internals are worn and need to be replaced, don't bother, get them off CWC
koukie Posted January 14, 2015 Posted January 14, 2015 They can't be removed.All you can do is clean and re-grease.If they are beyond repair get a new set as a service kit costs the same as the pedals.Hehe of course it can, I have done it but with a bit of effort.
Spoke101 Posted January 14, 2015 Posted January 14, 2015 Woops. Turns out i have look quartz pedals.Haha, hold on to them for me for when my quartz give up. For the OP, do an Internet search. There is a video I found where the tool used to remove a fork bearing race is used to remove the sleeve. A word of caution, I have heard that that sleeve is tapered and once off does not press on tight again. So you might have to machine new ones or lock tight them on. This is a project I have in the pipe line as my road pedals are the Ti ones and are nearly 4k to replace.
Spoke101 Posted January 14, 2015 Posted January 14, 2015 Hehe of course it can, I have done it but with a bit of effort.Which modles have ypu done it on? And did the sleeve press back tightly?
mtbride Posted October 30, 2015 Posted October 30, 2015 Can anyone provide a detailed guide on how to service them perhaps? And what grease does one use on them? Thanks
Recommended Posts
Archived
This topic is now archived and is closed to further replies.