Jump to content

Build old bike into new one


Recommended Posts

Posted

Hi guys and gals

 

As the topic states I want to take my current Mongoose Tyax sport, and build it into a new bike. 

 

Since I do not have the funds to buy a better bike once of, I was thinking that I might build the bike as funds gets available. 

My current bike is standard with 3x8 shimano altus components. And one heavy ass santour front shock. 

 

Complete bike weighs 16,5 kg. 

 

The question is now, where do I start? Do I first buy a new frame and just move everything over?

Or do I upgrade the gears first to 2x10 or 1x10 (I am open for suggestions). Also considering grip shifters.

Or do I start with a new fork?

 

There is lots of weight in the frame itself. 

 

I know how to ride my bike but I am not technical enough to know what would be a better choice. I used this bike for 3 arguses and training. Bought a roadie last month, hence the "upgrade" to full on offroad. 

 

Thanks in advance for the advise 

Posted

It depends on what I can find on thehub. I am not in the position to spend much at a time, but if I know i need to upgrade component x, Ill hunt it down and buy it. (Its going to  be a loooong term project.)

 

I have no idea what the final budget will be. 

 

Do you suggest that I first do a calculation of what I will be able to spent in total? 

Posted

It depends on what I can find on thehub. I am not in the position to spend much at a time, but if I know i need to upgrade component x, Ill hunt it down and buy it. (Its going to  be a loooong term project.)

 

I have no idea what the final budget will be. 

 

Do you suggest that I first do a calculation of what I will be able to spent in total? 

Yes.

 

I would.

 

For Example....

 

If i could afford say R1000 per month towards this project, and i designate 10 months to complete it. i would have spent R10k

 

Perhaps it is better to save the 10K and buy a 2015 model early in 2016 at a reduced rate, or preferably a good second hand bike for 10k with great components on it.

 

You might find significant savings, you might not....but until you know which mountain to climb, you cant pick a route.

 

But thats just my opinion

Posted

Valid input, and from what I have just read on another topic, it might end up being "cheaper" to buy a better bike than upgrading. 

 

Thanks for the advice Wayne. 

 

Ill probably end up riding my bike another year then, and then buying something proper. 

Posted

Valid input, and from what I have just read on another topic, it might end up being "cheaper" to buy a better bike than upgrading.

 

Thanks for the advice Wayne.

 

Ill probably end up riding my bike another year then, and then buying something proper.

Currently I have the same idea, but after I spoke to a few friends I came to the conclusion that it will/might work out more expensive to do a build over. Now I'm rather going to look for a new bike.
Posted

Thanks for your help and input wayne. I am going to follow in BSGs footsteps and just save up and buy a bike round Dec. (perhaps in time for christmas) 

Great.

 

You should be able to get some good second hand deals. Around that time of year, most guys have upgraded to 2016 models and you can pick up 2015's for around half of there new price (as a rule of thumb)

 

Check out the Hub classifieds. Dont be scared to look nationally.

 

It costs a few hundred rand to ship, and if you want, most hubbers will go check out the bike on your behalf before you buy.

 

Also, dont be scared to start a thread asking for advice on if you think its a good deal or not...We all help each other on here.

Posted

Currently I have the same idea, but after I spoke to a few friends I came to the conclusion that it will/might work out more expensive to do a build over. Now I'm rather going to look for a new bike.

 

Yes, although i agree with Wayne's advice (It is always more expensive to build a bike vs buying on special in a store), there is another angle to consider, say you save for 8 months and have R8k sitting waiting for a new bike, but you walking through the shops / browsing online and you see a new X (X can be any other passion / hobby) that is just so "cheap" you decide to buy it (Note: i'm avoiding the "if something happens" part cause life will always get in the way and you need to be prepared anyway), then you end up back at square one.

 

At least buying physical parts over a period of time means that the cash is committed to the project and wont get sidelined elsewhere, this also keeps you committed because you can see the parts pile growing each month.

Posted

Hi .

I have the same bike! Also thinked to upgrade certain parts... better safe a little bit and then buy a good second hand. I'm getting my Marin rift zone soon dual shock!!!

Posted

Yes, although i agree with Wayne's advice (It is always more expensive to build a bike vs buying on special in a store), there is another angle to consider, say you save for 8 months and have R8k sitting waiting for a new bike, but you walking through the shops / browsing online and you see a new X (X can be any other passion / hobby) that is just so "cheap" you decide to buy it (Note: i'm avoiding the "if something happens" part cause life will always get in the way and you need to be prepared anyway), then you end up back at square one.

 

At least buying physical parts over a period of time means that the cash is committed to the project and wont get sidelined elsewhere, this also keeps you committed because you can see the parts pile growing each month.

This was my exactly my chain of thought. hence the thread. Its guess ill have to be very strong this year....

Archived

This topic is now archived and is closed to further replies.

Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout