GrahamS2 Posted January 4, 2017 Posted January 4, 2017 So I have a torque wrench and it still happened.Those torque values printed on components are wet thread values. i.e for a lubricated thread. If you're torquing a dry thread you need a whole lot less torque!
AlanD Posted January 4, 2017 Author Posted January 4, 2017 Managed to get it out. Filled a small groove to try screw it out but i couldn't get it deep enough so just hammered the screw driver a good few times to turn the bolt and it turned out. A few scrapes on the clamp but ill take that.
Mongoose! Posted January 4, 2017 Posted January 4, 2017 Managed to get it out. Filled a small groove to try screw it out but i couldn't get it deep enough so just hammered the screw driver a good few times to turn the bolt and it turned out. A few scrapes on the clamp but ill take that. and this ?
AlanD Posted January 4, 2017 Author Posted January 4, 2017 and this ? post-57045-0-58628000-1483537262.jpgLol, thats just a tear in the protective film that was there prior to operation bolt extraction :-)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.