Newster Posted September 22, 2021 Share Evening all, I want to find a 2nd hand through axle in the classifieds to replace the one in the photos but I'm scared of buying the wrong size (complete cycling noob). Can someone point me in the right direction and also let me know what to look out for/ask the seller about? Chances are I'll have to buy it remotely. Link to comment Share on other sites More sharing options...
Newster Posted September 22, 2021 Share Will this work? https://bikehub.co.za/classifieds/item/wheel-spares-and-axles/494389/shimano-fox-thru-axle-quick-release Link to comment Share on other sites More sharing options...
RobertWhitehead Posted September 22, 2021 Share It is possible that it may work as I see Fox on both of them ????. Normally the pitch of the thread is different between Rockshox and Fox LBKloppers 1 Link to comment Share on other sites More sharing options...
Ernst Kromhout Posted September 22, 2021 Share 12 minutes ago, Newster said: Will this work? https://bikehub.co.za/classifieds/item/wheel-spares-and-axles/494389/shimano-fox-thru-axle-quick-release 14 minutes ago, Newster said: Evening all, I want to find a 2nd hand through axle in the classifieds to replace the one in the photos but I'm scared of buying the wrong size (complete cycling noob). Can someone point me in the right direction and also let me know what to look out for/ask the seller about? Chances are I'll have to buy it remotely. I'm currently selling the one below If you’re confident it’ll work you can buy it for half the price listed and if it doesnt work i’ll refund you but if it does you can just pay the other half Eddy Gordo 1 Link to comment Share on other sites More sharing options...
Newster Posted September 22, 2021 Share 14 minutes ago, Ernst Kromhout said: I'm currently selling the one below If you’re confident it’ll work you can buy it for half the price listed and if it doesnt work i’ll refund you but if it does you can just pay the other half Sounds very reasonable, just to confirm I pay 50% deposit and you'll send it to me (courier at my cost). If it works I pay the balance, if it doesn't I send it back (courier at my cost) and you refund my deposit? Link to comment Share on other sites More sharing options...
Ernst Kromhout Posted September 22, 2021 Share 1 minute ago, Newster said: Sounds very reasonable, just to confirm I pay 50% deposit and you'll send it to me (courier at my cost). If it works I pay the balance, if it doesn't I send it back (courier at my cost) and you refund my deposit? Yes, if you are fine with that we can do it Link to comment Share on other sites More sharing options...
Newster Posted September 22, 2021 Share 3 minutes ago, Ernst Kromhout said: Yes, if you are fine with that we can do it 100%, could you just measure it's length and diameter for me? Hoping the threads match cos they're both Fox forks Link to comment Share on other sites More sharing options...
Stavros94 Posted September 22, 2021 Share Evo bikes should have if you don’t come right. also to check the pitch if you don’t have the little pitch checkers you can try (don’t force ) thread a nut on it. standard thread is 1.75 normally and I found the axles I was after where 1.5 pitch. I actually made an axel ( it was during the heat of the no parts situation and I had to ride ). Newster 1 Link to comment Share on other sites More sharing options...
Ernst Kromhout Posted September 22, 2021 Share 44 minutes ago, Newster said: 100%, could you just measure it's length and diameter for me? Hoping the threads match cos they're both Fox forks I’d say the diameter is 15mm and the length 15cm Link to comment Share on other sites More sharing options...
Newster Posted September 23, 2021 Share 8 hours ago, Ernst Kromhout said: I’d say the diameter is 15mm and the length 15cm I'd say the length is closer to 15.5cm. 10mm longer than mine. Not sure it's going to work ????♀️. Diameter looks spot on though TheoG 1 Link to comment Share on other sites More sharing options...
JA-Q001 Posted September 23, 2021 Share 9 hours ago, Ernst Kromhout said: I’d say the diameter is 15mm and the length 15cm Well, just take a clear pic of the detail printed on the axle maybe? Then anyone can compare. From what I can see, your axle is for a 110mm x15mm hub axle with a M14x1.5mm Thread and for a Fox. The 110 would suggest Boost fork. Otherwise google the Part Number - 620-09-063? its 820-09-063 Edit: I see his part number on his axle is 820-00-203, so not sure its compatible. Edited September 23, 2021 by JA-Q001 Link to comment Share on other sites More sharing options...
BaGearA Posted September 23, 2021 Share Since its A F0X axle im assuming its off a fox fork. Post the tune id here and I'll tell you exactly what axle you need Link to comment Share on other sites More sharing options...
Ernst Kromhout Posted September 23, 2021 Share 15 minutes ago, JA-Q001 said: Well, just take a clear pic of the detail printed on the axle maybe? Then anyone can compare. From what I can see, your axle is for a 110mm x15mm hub axle with a M14x1.5mm Thread and for a Fox. The 110 would suggest Boost fork. Otherwise google the Part Number - 620-09-063? its 820-09-063 Edit: I see his part number on his axle is 820-00-203, so not sure its compatible. Yes its 110x15 and it is M14x1.5mm Link to comment Share on other sites More sharing options...
Newster Posted September 23, 2021 Share 7 hours ago, BaGearA said: Since its A F0X axle im assuming its off a fox fork. Post the tune id here and I'll tell you exactly what axle you need The decals on the fork say that it's a fox float 32. What is a tune id? The hub on the wheel is a Hope Evo Pro 2 if that makes any difference Link to comment Share on other sites More sharing options...
Newster Posted September 23, 2021 Share 18 hours ago, Ernst Kromhout said: I'm currently selling the one below If you’re confident it’ll work you can buy it for half the price listed and if it doesnt work i’ll refund you but if it does you can just pay the other half Ernst, thank you very much for your generous offer. I'm going to hold back for a while until I'm sure that it will work rather than waste R200 on unnecessary courier fees. If another buyer comes along before then feel free to sell to them Link to comment Share on other sites More sharing options...
Ernst Kromhout Posted September 23, 2021 Share 4 minutes ago, Newster said: Ernst, thank you very much for your generous offer. I'm going to hold back for a while until I'm sure that it will work rather than waste R200 on unnecessary courier fees. If another buyer comes along before then feel free to sell to them No problem! Thanks for letting me know, if you don’t come right and need the one I’m selling my offer is still up Newster 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now