Where to purchase TT bar angled riser kit

[DarrynBerry]

Good evening. Any suggestions as to where to purchase TT bar riser kit (not the Profile design round clips). Looking for a small lift with an angle as well. Cannot seem to find anything online except for the round Profile design options. See image below of the bars. Any suggestions most welcome. Thanks. 

IMG_5457.HEIC

Edited September 2, 2025 by DarrynBerry

[Ispeed_V]

Might sound like a silly response but could you not look to just put a piece of hard rubber under the risers to give them the lift you need and then just angle the entire bar set up to the angle required?

Alternatively, if you can find some hard rubber, you could always shape it to the angle required.

[bleedToWin]

Looks like the same bar I have. It's from a reputable Chinese supplier. The model number is TTHB004 if you want to look on Aliexpress. Spare parts are available include risers but no angles. Let me know if you decide to order as I might also need risers. At the moment I need to figure out increasing my reach first and how to mount my new extensions (they have a flat base, not round poles like yours). It's a bit of a headache! 😆

[bleedToWin]

Could the Profile Design 15 degree angles not be massaged to work for you perhaps? 

[shaper]

If the PD 15deg mentioned above does not work, you might be able to get a Fouriers wedge adaptor to fit.  You will need to check your riser bolt spacing  https://www.fouriers-bike.com/en/TRIATHLON/WEDGE/

You can buy them on aliexpress