Speeddemon Posted July 7, 2009 Share Hi all I am fed up with my shifting beeing screwed-up after a muddy ride.Any advice on what may be causing it and how I can resolve this problem Link to comment Share on other sites More sharing options...
FLX1 Posted July 7, 2009 Share Wat system r u using? Link to comment Share on other sites More sharing options...
Mr Mulebar Posted July 8, 2009 Share Define screwed up? Link to comment Share on other sites More sharing options...
mountain_lion Posted July 8, 2009 Share Yes, more info required, but I am guessing you have dirty cables.Inners can be cleaned to some extent, but outers are not that easy.Easy to replace and not very expensive, so I suggest replace the inners and outers.While you are at it, you might consider going for continuous outers.Less places for the dirt to get in.https://www.bikehub.co.za/forum_posts.asp?TID=54503 mountain_lion2009-07-08 01:01:40 Link to comment Share on other sites More sharing options...
Speeddemon Posted July 8, 2009 Share Wat system r u using? I ride a Shimano LX rear derailure. Link to comment Share on other sites More sharing options...
Speeddemon Posted July 8, 2009 Share Define screwed up? I do not have a problem with my front chainrings but, when I want to shift to a lower gear I sometimes have to shift three times before I get any reaction. Shifting to a higher gear isn't a problem Link to comment Share on other sites More sharing options...
Free Posted July 8, 2009 Share Get Sram. You'll never have any shifting problems again. They are far superior in wet conditions than shimano. Im not biased because I ride XT. But Im getting Sram as soon as possible. Link to comment Share on other sites More sharing options...
AndreZA Posted July 8, 2009 Share Wat system r u using? ? I ride a Shimano LX rear derailure. does not say much. How old are your cables? Are they Shimano or no-name brand cables and housing? Link to comment Share on other sites More sharing options...
GoLefty!! Posted July 8, 2009 Share you need continous housing. see sticky thread at top of TECH Q&A forums list. Link to comment Share on other sites More sharing options...
Speeddemon Posted July 8, 2009 Share Get Sram. You'll never have any shifting problems again. They are far superior in wet conditions than shimano. Im not biased because I ride XT. But Im getting Sram as soon as possible. If I hade the cash I would but I don't so I can't Link to comment Share on other sites More sharing options...
Speeddemon Posted July 8, 2009 Share I ride a Shimano LX rear derailure. does not say much. How old are your cables? Are they Shimano or no-name brand cables and housing? I had the cables and housing replaced 2 weeks ago before a 60km race. The shifting was perfect before the race. I am stil struggeling with it now. Speeddemon2009-07-08 03:25:15 Link to comment Share on other sites More sharing options...
AndreZA Posted July 8, 2009 Share I had the cables and housing replaced 2 weeks ago before a 60km race. The shifting was perfect before the race.? I am stil struggeling with it now. replaced with what? Alot of shops will fit Giant cables and housing which is crap. Link to comment Share on other sites More sharing options...
NotSoBigBen Posted July 8, 2009 Share Get Sram. You'll never have any shifting problems again. They are far superior in wet conditions than shimano. Im not biased because I ride XT. But Im getting Sram as soon as possible. If I hade the cash I would but I don't so I can't Sorry to say but SRAM is no gaurantee of 'you'll never have shifting problems again' and I ride both. It may be better in the mud but with enough mud it doesn't actually matter what you ride .......... Link to comment Share on other sites More sharing options...
AndreZA Posted July 8, 2009 Share Sorry to say but SRAM is no gaurantee of 'you'll never have shifting problems again' and I ride both. It may be better in the mud but with enough mud it doesn't actually matter what you ride .......... and then logic had to step in, thanks BB. Link to comment Share on other sites More sharing options...
Mr Mulebar Posted July 8, 2009 Share I had the cables and housing replaced 2 weeks ago before a 60km race. The shifting was perfect before the race.? I am stil struggeling with it now. replaced with what? Alot of shops will fit Giant cables and housing which is crap. Agreed, cheap cables are a no no if you are a proper cyclist, whether you run continuous cables or not cheap cables will give problems. Fit genuine SHIMANO or other quality cables. Personally I have always fitted XTR cable sets and have never had a problem with shifting, except where the bike got that clogged with mud that the d?railleur couldn't move nor the wheels Link to comment Share on other sites More sharing options...
MoreTrails Posted July 8, 2009 Share SpeedDemon, seeing as though you replaced your cables 2 weeks ago it sounds like they just need a bit of love and attention. Give the cables and outers a good clean and some lube and you should be back up and running again. Ask any hubber how and why and they can tell you - clean cables make for smooth shifting! However if you came off during your race and bent the derailler hanger you may have to have that straightened by your LBS before you can get those slick shifts happening again. Again a simple procedure, but with a nifty looking tool. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now