Where can i buy bearings?

[brightred]

hello

 

Im busy overhauling my '07 Morewood Izimu and i want to replace the pivot bearings. They seem to be pretty standard ball bearings. If i buy them from Morewood direct then they will be rediculously overpriced... where else can i buy bearings from?

 

34mm external diameter

21.5mm internal diameter

9.5 thickness

[4u2nv]

Try Bearing man and/or Bearings internationel. they will sort you out

[TiBones]

Where you based Brightred?

[Mackie]

Get some enduro bearings from www.rushsports.co.za

[BenDL]

Get some enduro bearings from www.rushsports.co.za

 

+1 and they are also the Morewood guys!

 

As far as I know Morewood use Enduro bearing as standard.

[dirtrider]

A bearing is a bearing is a bearing !

[MyGT]

Try Bearing man and/or Bearings internationel. they will sort you out

+1

[brightred]

Where you based Brightred?

 

Cape Town

[brightred]

Get some enduro bearings from www.rushsports.co.za

 

rushsports only have bearing for specific bb's and hubs

[brightred]

Try Bearing man and/or Bearings internationel. they will sort you out

 

phoned both of them... super cheap super helpful! id recommend either company to anyone!

[Slowbee]

brightred, also give Mr TiBones a call ... he has some contacts and could possibly hook you up with some bearings at a nice price

[Brighter-Lights]

All the bearings I've bought at Bearingman (BMG) in the past were crap compared to Enduro's bearings... their seals didn't last very long and they needed frequent replacement...

 

 

 

[patches]

hello

 

Im busy overhauling my '07 Morewood Izimu and i want to replace the pivot bearings. They seem to be pretty standard ball bearings. If i buy them from Morewood direct then they will be rediculously overpriced... where else can i buy bearings from?

 

34mm external diameter

21.5mm internal diameter

9.5 thickness

 

 

I underwent this exact same procedure on my Izimu about a month back.

 

I got the bearings from Bearing Man.

I just took one with. They used their verniers on it and gave me my options.

I went for rubber seal (as they are better in dirty conditions than metal seal)

 

I paid R85 in total for NSK bearings. They work like a dream!

Hope at helps

[dirtrider]

All the bearings I've bought at Bearingman (BMG) in the past were crap compared to Enduro's bearings... their seals didn't last very long and they needed frequent replacement...

 

Where did you use the bearings ? On a 35ton loadbin ? Been using cheap bearing for all types of applications for years and the diff between a R200 super sealed , ultra round and a R25 taiwanese bearing was zero as far as durability goes . But maybe I have just been lucky all these years or it is even possible that I install the stuff wrong resulting in prolonged life !

[Slowbee]

Where did you use the bearings ? On a 35ton loadbin ? Been using cheap bearing for all types of applications for years and the diff between a R200 super sealed , ultra round and a R25 taiwanese bearing was zero as far as durability goes . But maybe I have just been lucky all these years or it is even possible that I install the stuff wrong resulting in prolonged life !

 

if it works you must be doing it wrong DR