Grantpayne Posted April 12, 2018 Posted April 12, 2018 I just got a trance x2 (2010) I have a worn DU bushing and LBS want R350 for a new bushing... where else can I get one that will fit?
ALLMTB Posted April 12, 2018 Posted April 12, 2018 http://www.robbiesbicycleconcept.co.za/index.php?route=product/product&path=59_69&product_id=117
droo Posted April 12, 2018 Posted April 12, 2018 http://www.robbiesbicycleconcept.co.za/index.php?route=product/product&path=59_69&product_id=117 Compare apples with apples... http://www.robbiesbicycleconcept.co.za/index.php?route=product/product&path=59_69&product_id=115 If the alu hardware is still OK you'll get away with a R 60 DU bushing, but if you need the full kit it's going to sting.
Graham W Posted April 12, 2018 Posted April 12, 2018 There is a standard upgrade kit available form fox as the DU bush has been discontinued contact your lbs to order you a set from the agents
porqui Posted April 12, 2018 Posted April 12, 2018 I just got a trance x2 (2010) I have a worn DU bushing and LBS want R350 for a new bushing... where else can I get one that will fit? You get from Droo or Stoke
Skylark Posted April 12, 2018 Posted April 12, 2018 Skf sells the Fox sized du bushing, the only issue is cutting them down to size neatly.
Grantpayne Posted April 13, 2018 Posted April 13, 2018 any link? I contacted Onico yesterday and all the guy told me was that the DU three piece system had been discontinued... no mention of an upgrade kit. The bike is with the LBS now so will see what options they come up with. There is a standard upgrade kit available form fox as the DU bush has been discontinued contact your lbs to order you a set from the agents
ALLMTB Posted April 13, 2018 Posted April 13, 2018 any link? I contacted Onico yesterday and all the guy told me was that the DU three piece system had been discontinued... no mention of an upgrade kit. The bike is with the LBS now so will see what options they come up with. Just make sure of the size you need: https://www.cogentindustries.co.za/product/low-friction-fox-shock-bush-8mm/
Alouette3 Posted April 13, 2018 Author Posted April 13, 2018 Got my last DU bushings from Droo at Stoke, and did away with the 2 aluminium inserts (the cause of the rapid wear of the DU bushings) for a solid stainless bar that someone turned to the correct diameter for me, just with a little spacer ring slipped on each side to keep the shock centered. "porqui" actually turned a couple solid bars out of brass that he is running on his Trance.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.