johanpre44 Posted January 25, 2014 Posted January 25, 2014 Looking at getting myself a Bryton Rider 40 in a month or two, but I have some questions regarding the product which I could not find answers for via Google searches, maybe some of you hubbers have first hand experience. Can the Rider 40 connect to any ANT+ sensor? Like a Garmin Speed/Cadence sensor or a Suunto HR Belt? The documentation states that its ANT+ compatible, but the ANT+ website do not have it listed (like it does the Garmin 500 with its compatible sensors). Bryton do state that it is compatible with Power meters but do not list any sensor models. From their documentation I assume that it is only compatible with the Bryton sensors. How accurate is the altitude on this unit? I know the Rider 21 have a built in Barometer which improves the altitude accuracy (I understand its not on the Rider 20), but again the Rider 40 documentation doesn't state that there is a barometer. Some Reviews. Is it worthwhile getting a Rider 40 or should I rather be looking at something like a Garmin Edge 500/510? Other than the cost of the Garmin I'm also concerned about water, the Rider 40 is IPX7 (upto 1 meter for 30 minutes) while the Garmin is not (assuming that the Garmin will die when submerged).
Joeboy69 Posted January 26, 2014 Posted January 26, 2014 I had a Bryton 30/5 and am not unhappy that I lost it but can't give advice on the 40. Comparison with Garmin was done on another thread recently is you want to do a quick search :-)
Sharkie 2 Posted January 26, 2014 Posted January 26, 2014 I have a Bryton 40 and my SO has a Garmin 705....honestly the basic functions are the same but I do feel the Garmin has better quality and screen display....so if my advice had to be given I would say the Garmin 500/510 vs the Bryton 40 the Bryton would take it for value for money. ANT works perfectly on the Bryton no issues thus far and I use a Cycleops SL+ hub. I heard a rumour that Ballistic Bike is no longer going to import Bryton so be mindful of after sales backup
Tankman Posted January 26, 2014 Posted January 26, 2014 If your Google worked like it should ... it would tell you to get a Garmin ... but since it doesn't, I will tell you, get a Garmin!
Ballistic Bike trading Posted January 27, 2014 Posted January 27, 2014 I have a Bryton 40 and my SO has a Garmin 705....honestly the basic functions are the same but I do feel the Garmin has better quality and screen display....so if my advice had to be given I would say the Garmin 500/510 vs the Bryton 40 the Bryton would take it for value for money. ANT works perfectly on the Bryton no issues thus far and I use a Cycleops SL+ hub. I heard a rumour that Ballistic Bike is no longer going to import Bryton so be mindful of after sales backup Hi Sharky, As a wise man once said “I don't have to listen to rumours about a man when I can judge him for myself."Ballistic Bike Trading will continue to distribute and support Bryton and our customers for years to come.We would love to know where you hear the rumours, contact me on 011 023 4478 or on my mobile 071 878 7992Have great day and keep on peddling.
Ballistic Bike trading Posted January 27, 2014 Posted January 27, 2014 Looking at getting myself a Bryton Rider 40 in a month or two, but I have some questions regarding the product which I could not find answers for via Google searches, maybe some of you hubbers have first hand experience. Can the Rider 40 connect to any ANT+ sensor? Like a Garmin Speed/Cadence sensor or a Suunto HR Belt? The documentation states that its ANT+ compatible, but the ANT+ website do not have it listed (like it does the Garmin 500 with its compatible sensors). Bryton do state that it is compatible with Power meters but do not list any sensor models. From their documentation I assume that it is only compatible with the Bryton sensors. How accurate is the altitude on this unit? I know the Rider 21 have a built in Barometer which improves the altitude accuracy (I understand its not on the Rider 20), but again the Rider 40 documentation doesn't state that there is a barometer. Some Reviews. Is it worthwhile getting a Rider 40 or should I rather be looking at something like a Garmin Edge 500/510? Other than the cost of the Garmin I'm also concerned about water, the Rider 40 is IPX7 (upto 1 meter for 30 minutes) while the Garmin is not (assuming that the Garmin will die when submerged). The Bryton Rider 40 is really a nice piece of kit, its affordable and will give you what you need when you need it.The device is ANT + compatible.The altitude accuracy on most recreational GPS devices are approx 10m-15m with only GPS function, the built in barometer in the Rider 40 will increase that for sure.... http://bryton.co.za/...der-40-t-detailThe Rider 40 T GPS Cycle Computer is a petite yet powerful training companion suitable for mountain or road cyclists whose motive for cycling is sport or competition. As a performance driven rider, the Bryton Rider 40 T with pre-loaded workout programs and test workouts, your training can be systematic and smooth. It is designed to motivate you to reach, even surpass your goals. The Rider 40 T also ships with the new indoor trainer friendly Bryton ANT+ Combo sensor that can transmit both Speed and Cadence data and has a simple setup with LED indicators. Included in this bundle is the next generation of Bryton Heart Rate transmitter that is smaller and lighter. The Rider 40 T provides a systematic and scientific training course to maximise your exercise output. It is pre-loaded with four selections, FTP (Functional Threshold Power), MHR (Maximum Heart Rate), LTHR (Lactate Threshold Heart Rate) and MAP (Maximum Aerobic Power) training courses. Seven pre-loaded workout courses are also provided for your training: Easy Ride, Tempo Interval, Cruise Internal, Time Trial Interval, Anaerobic-endurance Interval, Power it up and 100% MAP Interval.
Waynehans Posted January 27, 2014 Posted January 27, 2014 My Rider 50 has gone to war and back, and never ever had a days problems, just had to replace the HR Strap batteries. I'm very happy with Bryton!
Warren911 Posted January 27, 2014 Posted January 27, 2014 I recently got a Rider 20, and am loving it.It supports ANT+ as per documentation.Thumbs up to BrytonI am waiting for an ANT dongle, so will let you know how well that works
T-Bob Posted January 27, 2014 Posted January 27, 2014 I've had Garmin(500) and Bryton (40 and 50). Both makes are good but personally I've really liked the Brytons. They are a little bit keener and hungrier, the 50 uses open source maps and is always free. The 40 I had was brilliant, worked like a charm, was compact, did everything I wanted and would recommend 100%. Mine had the HRM, Speed / Cadence sensor as well for IDT training. Did everything I wanted and nothing I didn't. Best thing though has been the Bryton customer service I've had. The international guys were awesome and via mail they worked with me over a weekend to fix an iOS bug that stopped my 50 being seen by certain model of macbookPro. Like the 50 alot (though they seem to have stopped making it now) and would like to see what the new range is like.
Slower Posted January 29, 2014 Posted January 29, 2014 I have a 40 for a year now... Not a single problem...
Jasonvantslot Posted January 30, 2015 Posted January 30, 2015 I have the same question as Johanpre44, can any one answer this question "Can the Rider 40 connect to any ANT+ sensor? Like a Garmin Speed/Cadence sensor or a Suunto HR Belt?" Thanks
Butterbean Posted January 30, 2015 Posted January 30, 2015 I have the same question as Johanpre44, can any one answer this question "Can the Rider 40 connect to any ANT+ sensor? Like a Garmin Speed/Cadence sensor or a Suunto HR Belt?" ThanksYes
johanpre44 Posted January 31, 2015 Author Posted January 31, 2015 Only Suunto Devices works with their HR belt (some proprietary version of ANT). My Garmin Edge 500 did not pick it up, doubt the Bryton Ryder will. Pretty sure the Bryton will work with the Garmin Speed/Cadence (haven't tried it myself yet)
Mets Posted February 2, 2015 Posted February 2, 2015 I also have the Rider 40 - been using the HR strap from my Garmin FR305 from day one without any problems. Very happy with mine and compared to the price of the Garmin Edge 500, when I bought, it was a no-brainer. The only hassle is that Strava stopped their support to do direct uploads from the Bryton devices.
Mannypot Posted February 2, 2015 Posted February 2, 2015 I have the rider 40 and it works well for me. The one gripe that I do have is bryton's website functionality. They have updated it a few months ago but I still feel that more improvement is needed.
Steven Knoetze (sk27) Posted February 2, 2015 Posted February 2, 2015 I have the 40 and love it.Wish they would give lessons on using the training function.I tried but got so annoyed by all the beeping because I stray out of the zones. Never used it again!!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.