Jump to content

Scott Spark - Bring the Bling


skipperw

Recommended Posts

Posted

After Berg & Bush I was forced to take a month's rest owing to some severe knee issues. To avoid complete frustration and depression, I thought I'd spruce my bike up. 

Here's a before:

post-4458-0-08344100-1418133235_thumb.jpg

 

Then I stripped her down:

post-4458-0-54567600-1418133268_thumb.jpg

 

A bit of Plascon RemoveALL:

post-4458-0-33871100-1418133295_thumb.jpgpost-4458-0-27776800-1418133299_thumb.jpgpost-4458-0-34834400-1418133302_thumb.jpg

 

And a bit of professional polishing:

post-4458-0-55295500-1418133349_thumb.jpg

 

Suddenly the fork looked a bit dull too...So a facelift was ordered:

post-4458-0-99398200-1418133389_thumb.jpg

 

And then the bling:

post-4458-0-66544800-1418133442_thumb.jpgpost-4458-0-95609500-1418133445_thumb.jpgpost-4458-0-57756800-1418133448_thumb.jpgpost-4458-0-51437000-1418133450_thumb.jpgpost-4458-0-90555800-1418133453_thumb.jpgpost-4458-0-56147000-1418133457_thumb.jpgpost-4458-0-64076300-1418133459_thumb.jpgpost-4458-0-05610700-1418133462_thumb.jpgpost-4458-0-69345100-1418133464_thumb.jpg

 

It's now a 1x10 running a 32 up front and a 11 - 40 at the rear with a 16 replacing 15 and 17. 

 

A special thanks goes to Cycledelic who did the polishing and fork respray, and Linden cycles who helped with my pivot bolts after I managed to misplace a large number of washers...

Posted

OMG that looks awesome, I want to do mine now (have a Spark 950) costs?

 

Costs are tricky, but here's a rough break down:

 

1. Plascon RemovALL = R300

2. Polish = Dependent on whether or not you want to go pro or not. I recommend pro. 

3. Cables = R500

4. 1 x 10 conversion = R1700

5. Stem and bars = R1100

6. Grips = R300

7. Occasional bling = R500

Archived

This topic is now archived and is closed to further replies.

Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout