Direct Mount XT RD

[AlanD]

Hi Hubbers,

 

I got a 10 sp XT clutch type RD to replace my 9 sp XTR rd (up for sale soon) and its now got a bracket attached to it that is confusing my non mechanical minded brain.

 

Is it it as simple as bolting this new bracket part onto the drop out where my old rd was bolted onto or am j missing something with this new bracket?

As I understand it, it is direct mount meaning you dont need a drop out of you have direct mount compatible frame???

 

Thanks

[still learning]

The dropout on the RD can be removed and then mounted directly as before. Had a similar issue and after a few Google searches I finally figured it out.

[AlanD]

Ok right, so remove that bracket part from the rd then put the drop out from the bike it its place and bolt on?

[PeterF]

Dont remove anything it must be installed like this -

 

[AlanD]

I understand better with pictures, thanks. Attach the b-link on the RD to the drop out on the bike. Is there then movement where the b-link attaches to the rd?

[PeterF]

I understand better with pictures, thanks. Attach the b-link on the RD to the drop out on the bike. Is there then movement where the b-link attaches to the rd?

Yes the RD does pivot on the link, perfectly normal.

[AlanD]

Cool. Final question: at what angle does the b-link attach to the frame drop out or is there only one way ot fits on?

[PeterF]

It only fits one way. Just make sure that the plate that the adjusting screw pushes against is above the flat area of the drop out.

[Alouette3]

The link should have a tab on it which rests against the step on the drop-out to get the angle right.

[AlanD]

Yes, there is a tab on the link and the drop out has this step. Ok cool, will check it tonight. Thanks for all the help.

[still learning]

Dont remove anything it must be installed like this -

 

XT plus RD.jpg

My bad. MIsunderstood. My bikes hanger has the dropout coming out at an angle and had to remove the b-link.