ruib Posted April 20, 2015 Share I have the pro logo kappa evo saddle , and have a squeaking noise from it when riding, have put grease on the rails and tightened the bolts , but no success.Please any advice? Link to comment Share on other sites More sharing options...
DirtyDan Posted April 20, 2015 Share I have the pro logo kappa evo saddle , and have a squeaking noise from it when riding, have put grease on the rails and tightened the bolts , but no success.Please any advice?Try the same with the seatpost clamp. Link to comment Share on other sites More sharing options...
Hairy Posted April 20, 2015 Share I have the pro logo kappa evo saddle , and have a squeaking noise from it when riding, have put grease on the rails and tightened the bolts , but no success.Please any advice?what seat post?> Link to comment Share on other sites More sharing options...
KaKa Posted April 20, 2015 Share is it carbon?take it apart clean out all the dust. I use silicon spray wipe it clean and reassemble until next time the noise is backĀ Link to comment Share on other sites More sharing options...
BrandonF_ Posted April 20, 2015 Share I had the same issue with a SLR Selle, and eventually found that where the rails meet at the nose, it rubs on the plastic nose cover on the inside. All that helped was to force a little bit of grease in now and then Link to comment Share on other sites More sharing options...
ruib Posted April 20, 2015 Share Thanks guys, have tried the clamp as well, it is the saddle itself ,blerry annoying, will try some oil in the saddle. Link to comment Share on other sites More sharing options...
ruib Posted April 20, 2015 Share what seat post?>Merida Carbon h sbo 27,2mm Link to comment Share on other sites More sharing options...
camelman Posted April 21, 2015 Share I have the same with a Fizik saddle. I live with it, but I know it is where the steel rail meets the plastic. Bit of Silicone spray or WD40 might do the trick. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.