Installing a raceface crank

[Bomberman]

Evening Hubbers.

 

Need some advice here, I busted up my crank this weekend and need to replace it. I got a atlas raceface crank but its seems the shaft might be to long. 

 

The BB installed is a shimano 70 (I if I can remember correctly), and the old crank is a normal shimano 552.

 

Will It fit?

 

Thanks

[sakkiebomskok]

Raceface crank generally fit into shimano bb. Might have to run spacers depending on frame. Just to take up the extra space.

[BaGearA]

you have a BB72 and the previous one was a Bb52( slightly lower spec) both will ft yout crank and as mentioned above just use the correct amount of spacers

[Bomberman]

you have a BB72 and the previous one was a Bb52( slightly lower spec) both will ft yout crank and as mentioned above just use the correct amount of spacers

Found the problem, its a downhill crank 83mm. Gonna need a lot of spacers.

[droo]

You'll need a Howitzer BB or similar.

[Bomberman]

You'll need a Howitzer BB or similar.

I think I would rather take it off and sell it, Would love to keep it. Now I need a extraction cap, anybody know where I can get one?

http://cdn.hibike.com/image/product/KUS/KUS_RfKAU_Deus_04-07-il.jpg