NotSoBigBen Posted April 1, 2017 Posted April 1, 2017 Ouch that hurts a bit coming from you since you know what I do for my scraps and considering I helped you with a part you couldn't getAuk Dips ... It was not aimed at you but the suggestions of cork and other bodges that concern me. I am well aware that you would never ever compromise on safety!
Kalahari Vegmot Posted April 1, 2017 Author Posted April 1, 2017 Is there a small groove on the outside of the ring?Nopie dope
BaGearA Posted July 27, 2017 Posted July 27, 2017 Any ideas where i might find the following ?? Blue/Yellow O-rings Id 34mmThickness 1mm / 1.5mm / 2mm Ordering internationally is not really option as you have to order A minimum of 500
myveonix Posted July 27, 2017 Posted July 27, 2017 Get my o-rings for mainly shock & fork servicing from the guys. They can also do custom work as wellhttp://www.hydraulics-pretoria.co.za/pg/53072/o-rings-&-seals
David Marshall Posted July 27, 2017 Posted July 27, 2017 You will probably need to get them made up. Not sure what the economics for a small run will be. I use Fusion Trading in Germiston.
Letum911 Posted July 28, 2017 Posted July 28, 2017 Any ideas where i might find the following ?? Blue/Yellow O-rings Id 34mmThickness 1mm / 1.5mm / 2mm Ordering internationally is not really option as you have to order A minimum of 500 Take an example to a scuba shop. It looks as if it might be the same size that goes on a scuba cylinder where the 1st stage connects on a yoke system
Recommended Posts
Archived
This topic is now archived and is closed to further replies.