Face Plant Posted July 20, 2017 Share Hi Guys hope someone can give me some advise, I have a Merida Ninety-Six Team addition running XX1 Eagle, I would like to put an oval 36T chain ring in front but I have been told that the 36T oval doesn't fit on the bike, can anybody perhaps confirm this and maybe explain why? thanks Link to comment Share on other sites More sharing options...
Kiwi Posted July 20, 2017 Share Hi Guys hope someone can give me some advise, I have a Merida Ninety-Six Team addition running XX1 Eagle, I would like to put an oval 36T chain ring in front but I have been told that the 36T oval doesn't fit on the bike, can anybody perhaps confirm this and maybe explain why? thanks Hi Face Plant, It could be that the frame has a 36t largest chainring clearance limit. A 36 oval varies between 34t and 38t in size and might contact the chainstays. See if you can do a test fit, it might clear the chainstays. Edited July 20, 2017 by Kiwi Face Plant 1 Link to comment Share on other sites More sharing options...
Thomo Posted July 20, 2017 Share Clearance is the only thing that comes to mind. Link to comment Share on other sites More sharing options...
Thermophage Posted July 20, 2017 Share Hi Guys hope someone can give me some advise, I have a Merida Ninety-Six Team addition running XX1 Eagle, I would like to put an oval 36T chain ring in front but I have been told that the 36T oval doesn't fit on the bike, can anybody perhaps confirm this and maybe explain why? thanksthe 36 on it's long axis is bigger than 36, closer to the diameter of a 38 so it may very well eat into your chainstay... Face Plant 1 Link to comment Share on other sites More sharing options...
Face Plant Posted July 20, 2017 Share thanks guys, this makes sense. Link to comment Share on other sites More sharing options...
Kalahari Vegmot Posted July 20, 2017 Share Haha! Maybe consider 2x12? Long Wheel Base and Face Plant 2 Link to comment Share on other sites More sharing options...
Cippo Posted July 20, 2017 Share Is there a 34 tooth option? Link to comment Share on other sites More sharing options...
Face Plant Posted July 20, 2017 Share @ Cippo, yes the 34T apparently fits Cippo 1 Link to comment Share on other sites More sharing options...
Ruan Swanepoel Posted December 1, 2020 Share Hi Guys hope someone can give me some advise, I have a Merida Ninety-Six Team addition running XX1 Eagle, I would like to put an oval 36T chain ring in front but I have been told that the 36T oval doesn't fit on the bike, can anybody perhaps confirm this and maybe explain why? thanksHi there, did you ever manage to find the solution here or go with the 34t? I'm sitting with the same problem it is literally 2mm that it's touching the stays:( I've outgrown the 34t but would prefer the oval to a 36t round if possible. Link to comment Share on other sites More sharing options...
Psyrax Posted December 1, 2020 Share Haha! Maybe consider 2x12?Have anyone tried this? Link to comment Share on other sites More sharing options...
BaGearA Posted December 2, 2020 Share Have anyone tried this? I knew someone with a setup like this Just replaced the front crank with a shimano 2x one and added the shifter and derailleur Worked great Link to comment Share on other sites More sharing options...
DR ◣◢ Posted December 2, 2020 Share I knew someone with a setup like this Just replaced the front crank with a shimano 2x one and added the shifter and derailleur Worked greatNo change needed to the rear crank? Cappi, Quagga, Stefan_29 and 1 other 4 Link to comment Share on other sites More sharing options...
Jbr Posted December 2, 2020 Share I was running 32 round x 11-42 on my prev bike and thought moving to a 10-51 12spd cassette a 36 would be better, but I ended up going for 34 oval and so far I'm happy, I'm obviously not using the 51 often, it's nice to have that "bonus" gear for when I'm really cooked. Not sure how set your mind is for that 36, but maybe the 34 would be just fine and work better than the DIY-2x crank solution Link to comment Share on other sites More sharing options...
TheoG Posted December 2, 2020 Share I was running 32 round x 11-42 on my prev bike and thought moving to a 10-51 12spd cassette a 36 would be better, but I ended up going for 34 oval and so far I'm happy, I'm obviously not using the 51 often, it's nice to have that "bonus" gear for when I'm really cooked. Not sure how set your mind is for that 36, but maybe the 34 would be just fine and work better than the DIY-2x crank solution I was a bit skeptical in the beginning on the whole 1x thing, but I must say it work just fine, 12sp significantly better than 11sp. Started with 11sp (36 & 11-48), I very quickly changed to 38 in front and now I'm on 12sp (38 & 10-51). I cant spin like a bat from hell on 30, 32, 34 or even 36, how most guys do, I simply don't know. Surely if you don't use the 51 at all it make sense to pair with a 38, that way you will make more use of the 51 and also increase your max speed on the 10 cog. Sorry, that's just my logic and it work for me so far. Even with a 38, I use the 51 only on very steep long tough climbs. I didn't try oval yet, so cant offer any input on that. Edited December 2, 2020 by Theog Link to comment Share on other sites More sharing options...
BaGearA Posted December 2, 2020 Share Doesn't a 38 scratch your stays? Link to comment Share on other sites More sharing options...
TheoG Posted December 2, 2020 Share Nope, have about 7mm clearance, might be able to go oval or fit a 40. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now