JCC75 Posted January 21, 2019 Posted January 21, 2019 Howzit Hubbers,Are there any other Norco, (Fluid 3, 29er, 1x 10) owners out there that are experincing the constant chain dropping? Bought it August 2018.The chain drops whether the clutch is on or not, and alwasys when not under load. it happens even on my indoor trainer??
fanievb Posted January 21, 2019 Posted January 21, 2019 are your using a NW chainring?correct chain length?thinking out loud but it may be "kick-back" from your freewheel engaging/not engaging correctly causing a drop in tension on the chain
RobertWhitehead Posted January 21, 2019 Posted January 21, 2019 Are you using the correct chain ring in the front? Narrow-wide? If it's just a normal chain ring then it will carry on doing so. If you're using a narrow-wide chain ring then the chain can be too long. These are the most obvious reasons but if it's not one of the above then one will have to start looking at other possibilities
Me rida my bicycle Posted January 21, 2019 Posted January 21, 2019 If you are running a narrow wide could be the offset is not correct or your freebody might need so attention.
JCC75 Posted March 31, 2019 Author Posted March 31, 2019 Thanks for all the advice guys, it did in fact turn out to be the freehub, all sorted now!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.