Spindle spacers

[MORNE]

Does anyone know where i can find some of these locally for 24mm cranks? I see Token also makes some red Alu ones

 

I installed a Praxis PF30 converter BB for Shimano cranks into a new frame and obviously PF30's don't take spacers like a threaded ones do  . I just need to move the drive side out by about 2mm to centre the cranks in the frame. It is pushing my pseudo-OCD next level. Please see the pics attached. Anyone that can point me into the right direction? or where i can have some made even? 

 

 

EDIT:Regarding chainline...i'm good still at 50mm so 2mm extra wont hurt in the boost frame. 2mm will put me smack bang in the middle of a 10 speed cassette in the rear.

 

thanks in advance.

Morné

[David Marshall]

Check with your LBS.  They come with some BB's and are not always used.  End up in the magic box. I have some Sram ones that are 2.5 mm and the Wheels ones that are 1mm thick.  You should be able to beg some in CT.

[MORNE]

thanks. yea my research has indicated that they were plentiful on SRAM GPX cranks. literally need one 2.5mm x24mm ID one to space the saint crank out on the drive side like you would have anyway with a threaded BB and 73mm frame

[DieselnDust]

thanks. yea my research has indicated that they were plentiful on SRAM GPX cranks. literally need one 2.5mm x24mm ID one to space the saint crank out on the drive side like you would have anyway with a threaded BB and 73mm frame

Rotor bike, SRAM, and the old Shimano external cup threaded bb's come with spacer kits and these are available after market. Your lbs should be able to find some Shimano spacers. I may have some in a box somewhere. Will do an easter egg hunt tonight and let you know.

[MORNE]

thanks guys, Droo at Stoke hooked me up with some.

everything now perfect.